OpenSSL
Update OpenSSL to version 3.4.0

What patches are you missing?



CVE Vulnerabilities for OpenSSL

CVEPublishedSeverityDetailsExploitability Impact Vector
CVE‑2024‑07272024‑01‑26 09:15:08MEDIUM (6)Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL to crash leading to a potential Denial of Service attack Impact summary: Applications loading files in the PKCS12 format from untrusted sources might terminate abruptly. A file in PKCS12 format can contain certificates and keys and may come from an untrusted source. The PKCS12 specification allows certain fields to be NULL, but OpenSSL does not correctly check for this case. This can lead to a NULL pointer dereference that results in OpenSSL crashing. If an application processes PKCS12 files from an untrusted source using the OpenSSL APIs then that application will be vulnerable to this issue. OpenSSL APIs that are vulnerable to this are: PKCS12_parse(), PKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes() and PKCS12_newpass(). We have also fixed a similar issue in SMIME_write_PKCS7(). However since this function is related to writing data we do not consider it security significant. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.24LOCAL
CVE‑2023‑61292024‑01‑09 17:15:12MEDIUM (7)Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications running on PowerPC CPU based platforms if the CPU provides vector instructions. Impact summary: If an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL for PowerPC CPUs restores the contents of vector registers in a different order than they are saved. Thus the contents of some of these vector registers are corrupted when returning to the caller. The vulnerable code is used only on newer PowerPC processors supporting the PowerISA 2.07 instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However unless the compiler uses the vector registers for storing pointers, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3. If this cipher is enabled on the server a malicious client can influence whether this AEAD cipher is used. This implies that TLS server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue.24NETWORK
CVE‑2023‑56782023‑11‑06 16:15:43MEDIUM (5)Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. 41NETWORK
CVE‑2023‑53632023‑10‑25 18:17:44HIGH (8)Issue summary: A bug has been identified in the processing of key and initialisation vector (IV) lengths. This can lead to potential truncation or overruns during the initialisation of some symmetric ciphers. Impact summary: A truncation in the IV can result in non-uniqueness, which could result in loss of confidentiality for some cipher modes. When calling EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or EVP_CipherInit_ex2() the provided OSSL_PARAM array is processed after the key and IV have been established. Any alterations to the key length, via the "keylen" parameter or the IV length, via the "ivlen" parameter, within the OSSL_PARAM array will not take effect as intended, potentially causing truncation or overreading of these values. The following ciphers and cipher modes are impacted: RC2, RC4, RC5, CCM, GCM and OCB. For the CCM, GCM and OCB cipher modes, truncation of the IV can result in loss of confidentiality. For example, when following NIST's SP 800-38D section 8.2.1 guidance for constructing a deterministic IV for AES in GCM mode, truncation of the counter portion could lead to IV reuse. Both truncations and overruns of the key and overruns of the IV will produce incorrect results and could, in some cases, trigger a memory exception. However, these issues are not currently assessed as security critical. Changing the key and/or IV lengths is not considered to be a common operation and the vulnerable API was recently introduced. Furthermore it is likely that application developers will have spotted this problem during testing since decryption would fail unless both peers in the communication were similarly vulnerable. For these reasons we expect the probability of an application being vulnerable to this to be quite low. However if an application is vulnerable then this issue is considered very serious. For these reasons we have assessed this issue as Moderate severity overall. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this because the issue lies outside of the FIPS provider boundary. OpenSSL 3.1 and 3.0 are vulnerable to this issue.44NETWORK
CVE‑2023‑48072023‑09‑08 12:15:08HIGH (8)Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.26LOCAL
CVE‑2023‑38172023‑07‑31 16:15:10MEDIUM (5)Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.41NETWORK
CVE‑2023‑34462023‑07‑19 12:15:10MEDIUM (5)Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.41NETWORK
CVE‑2023‑29752023‑07‑14 12:15:09MEDIUM (5)Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be mislead by removing adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue.41NETWORK
CVE‑2023‑26502023‑05‑30 14:15:10MEDIUM (7)Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJ_obj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJ_obj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1_OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (*). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJ_obj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.34NETWORK
CVE‑2023‑12552023‑04‑20 17:15:07MEDIUM (6)Issue summary: The AES-XTS cipher decryption implementation for 64 bit ARM platform contains a bug that could cause it to read past the input buffer, leading to a crash. Impact summary: Applications that use the AES-XTS algorithm on the 64 bit ARM platform can crash in rare circumstances. The AES-XTS algorithm is usually used for disk encryption. The AES-XTS cipher decryption implementation for 64 bit ARM platform will read past the end of the ciphertext buffer if the ciphertext size is 4 mod 5 in 16 byte blocks, e.g. 144 bytes or 1024 bytes. If the memory after the ciphertext buffer is unmapped, this will trigger a crash which results in a denial of service. If an attacker can control the size and location of the ciphertext buffer being decrypted by an application using AES-XTS on 64 bit ARM, the application is affected. This is fairly unlikely making this issue a Low severity one.24NETWORK
CVE‑2023‑04662023‑03‑28 15:15:07MEDIUM (5)The function X509_VERIFY_PARAM_add0_policy() is documented to implicitly enable the certificate policy check when doing certificate verification. However the implementation of the function does not enable the check which allows certificates with invalid or incorrect policies to pass the certificate verification. As suddenly enabling the policy check could break existing deployments it was decided to keep the existing behavior of the X509_VERIFY_PARAM_add0_policy() function. Instead the applications that require OpenSSL to perform certificate policy check need to use X509_VERIFY_PARAM_set1_policies() or explicitly enable the policy check by calling X509_VERIFY_PARAM_set_flags() with the X509_V_FLAG_POLICY_CHECK flag argument. Certificate policy checks are disabled by default in OpenSSL and are not commonly used by applications.41NETWORK
CVE‑2023‑04652023‑03‑28 15:15:07MEDIUM (5)Applications that use a non-default option when verifying certificates may be vulnerable to an attack from a malicious CA to circumvent certain checks. Invalid certificate policies in leaf certificates are silently ignored by OpenSSL and other certificate policy checks are skipped for that certificate. A malicious CA could use this to deliberately assert invalid certificate policies in order to circumvent policy checking on the certificate altogether. Policy processing is disabled by default but can be enabled by passing the `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function.41NETWORK
CVE‑2023‑04642023‑03‑22 17:15:13HIGH (8)A security vulnerability has been identified in all supported versions of OpenSSL related to the verification of X.509 certificate chains that include policy constraints. Attackers may be able to exploit this vulnerability by creating a malicious certificate chain that triggers exponential use of computational resources, leading to a denial-of-service (DoS) attack on affected systems. Policy processing is disabled by default but can be enabled by passing the `-policy' argument to the command line utilities or by calling the `X509_VERIFY_PARAM_set1_policies()' function.44NETWORK
CVE‑2023‑04012023‑02‑08 20:15:24HIGH (8)A NULL pointer can be dereferenced when signatures are being verified on PKCS7 signed or signedAndEnveloped data. In case the hash algorithm used for the signature is known to the OpenSSL library but the implementation of the hash algorithm is not available the digest initialization will fail. There is a missing check for the return value from the initialization function which later leads to invalid usage of the digest API most likely leading to a crash. The unavailability of an algorithm can be caused by using FIPS enabled configuration of providers or more commonly by not loading the legacy provider. PKCS7 data is processed by the SMIME library calls and also by the time stamp (TS) library calls. The TLS implementation in OpenSSL does not call these functions however third party applications would be affected if they call these functions to verify signatures on untrusted data. 44NETWORK
CVE‑2023‑02862023‑02‑08 20:15:24HIGH (7)There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these inputs, the other input must already contain an X.400 address as a CRL distribution point, which is uncommon. As such, this vulnerability is most likely to only affect applications which have implemented their own functionality for retrieving CRLs over a network. 25NETWORK
CVE‑2023‑02172023‑02‑08 20:15:24HIGH (8)An invalid pointer dereference on read can be triggered when an application tries to check a malformed DSA public key by the EVP_PKEY_public_check() function. This will most likely lead to an application crash. This function can be called on public keys supplied from untrusted sources which could allow an attacker to cause a denial of service attack. The TLS implementation in OpenSSL does not call this function but applications might call the function if there are additional security requirements imposed by standards such as FIPS 140-3. 44NETWORK
CVE‑2023‑02162023‑02‑08 20:15:24HIGH (8)An invalid pointer dereference on read can be triggered when an application tries to load malformed PKCS7 data with the d2i_PKCS7(), d2i_PKCS7_bio() or d2i_PKCS7_fp() functions. The result of the dereference is an application crash which could lead to a denial of service attack. The TLS implementation in OpenSSL does not call this function however third party applications might call these functions on untrusted data. 44NETWORK
CVE‑2023‑02152023‑02‑08 20:15:24HIGH (8)The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may also be called directly by end user applications. The function receives a BIO from the caller, prepends a new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid, the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call BIO_pop() on the BIO. This internal function is in turn called by the public API functions PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1, SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL cms and smime command line applications are similarly affected. 44NETWORK
CVE‑2022‑44502023‑02‑08 20:15:24HIGH (8)The function PEM_read_bio_ex() reads a PEM file from a BIO and parses and decodes the "name" (e.g. "CERTIFICATE"), any header data and the payload data. If the function succeeds then the "name_out", "header" and "data" arguments are populated with pointers to buffers containing the relevant decoded data. The caller is responsible for freeing those buffers. It is possible to construct a PEM file that results in 0 bytes of payload data. In this case PEM_read_bio_ex() will return a failure code but will populate the header argument with a pointer to a buffer that has already been freed. If the caller also frees this buffer then a double free will occur. This will most likely lead to a crash. This could be exploited by an attacker who has the ability to supply malicious PEM files for parsing to achieve a denial of service attack. The functions PEM_read_bio() and PEM_read() are simple wrappers around PEM_read_bio_ex() and therefore these functions are also directly affected. These functions are also called indirectly by a number of other OpenSSL functions including PEM_X509_INFO_read_bio_ex() and SSL_CTX_use_serverinfo_file() which are also vulnerable. Some OpenSSL internal uses of these functions are not vulnerable because the caller does not free the header argument if PEM_read_bio_ex() returns a failure code. These locations include the PEM_read_bio_TYPE() functions as well as the decoders introduced in OpenSSL 3.0. The OpenSSL asn1parse command line application is also impacted by this issue. 44NETWORK
CVE‑2022‑43042023‑02‑08 20:15:24MEDIUM (6)A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection. 24NETWORK
CVE‑2022‑36022022‑11‑01 18:15:11HIGH (8)A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed the malicious certificate or for the application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address to overflow four attacker-controlled bytes on the stack. This buffer overflow could result in a crash (causing a denial of service) or potentially remote code execution. Many platforms implement stack overflow protections which would mitigate against the risk of remote code execution. The risk may be further mitigated based on stack layout for any given platform/compiler. Pre-announcements of CVE-2022-3602 described this issue as CRITICAL. Further analysis based on some of the mitigating factors described above have led this to be downgraded to HIGH. Users are still encouraged to upgrade to a new version as soon as possible. In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects. Fixed in OpenSSL 3.0.7 (Affected 3.0.0,3.0.1,3.0.2,3.0.3,3.0.4,3.0.5,3.0.6).44NETWORK
CVE‑2022‑33582022‑10‑11 15:15:10HIGH (8)OpenSSL supports creating a custom cipher via the legacy EVP_CIPHER_meth_new() function and associated function calls. This function was deprecated in OpenSSL 3.0 and application authors are instead encouraged to use the new provider mechanism in order to implement custom ciphers. OpenSSL versions 3.0.0 to 3.0.5 incorrectly handle legacy custom ciphers passed to the EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() and EVP_CipherInit_ex2() functions (as well as other similarly named encryption and decryption initialisation functions). Instead of using the custom cipher directly it incorrectly tries to fetch an equivalent cipher from the available providers. An equivalent cipher is found based on the NID passed to EVP_CIPHER_meth_new(). This NID is supposed to represent the unique NID for a given cipher. However it is possible for an application to incorrectly pass NID_undef as this value in the call to EVP_CIPHER_meth_new(). When NID_undef is used in this way the OpenSSL encryption/decryption initialisation function will match the NULL cipher as being equivalent and will fetch this from the available providers. This will succeed if the default provider has been loaded (or if a third party provider has been loaded that offers this cipher). Using the NULL cipher means that the plaintext is emitted as the ciphertext. Applications are only affected by this issue if they call EVP_CIPHER_meth_new() using NID_undef and subsequently use it in a call to an encryption/decryption initialisation function. Applications that only use SSL/TLS are not impacted by this issue. Fixed in OpenSSL 3.0.6 (Affected 3.0.0-3.0.5).44NETWORK
CVE‑2022‑22742022‑07‑01 08:15:08CRITICAL (10)The OpenSSL 3.0.4 release introduced a serious bug in the RSA implementation for X86_64 CPUs supporting the AVX512IFMA instructions. This issue makes the RSA implementation with 2048 bit private keys incorrect on such machines and memory corruption will happen during the computation. As a consequence of the memory corruption an attacker may be able to trigger a remote code execution on the machine performing the computation. SSL/TLS servers or other servers using 2048 bit RSA private keys running on machines supporting AVX512IFMA instructions of the X86_64 architecture are affected by this issue.46NETWORK
CVE‑2022‑20972022‑07‑05 11:15:08MEDIUM (5)AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn't written. In the special case of "in place" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected. Fixed in OpenSSL 3.0.5 (Affected 3.0.0-3.0.4). Fixed in OpenSSL 1.1.1q (Affected 1.1.1-1.1.1p).41NETWORK
CVE‑2022‑20682022‑06‑21 15:15:09CRITICAL (10)In addition to the c_rehash shell command injection identified in CVE-2022-1292, further circumstances where the c_rehash script does not properly sanitise shell metacharacters to prevent command injection were found by code review. When the CVE-2022-1292 was fixed it was not discovered that there are other places in the script where the file names of certificates being hashed were possibly passed to a command executed through the shell. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.4 (Affected 3.0.0,3.0.1,3.0.2,3.0.3). Fixed in OpenSSL 1.1.1p (Affected 1.1.1-1.1.1o). Fixed in OpenSSL 1.0.2zf (Affected 1.0.2-1.0.2ze).46NETWORK
CVE‑2022‑14732022‑05‑03 16:15:19HIGH (8)The OPENSSL_LH_flush() function, which empties a hash table, contains a bug that breaks reuse of the memory occuppied by the removed hash table entries. This function is used when decoding certificates or keys. If a long lived process periodically decodes certificates or keys its memory usage will expand without bounds and the process might be terminated by the operating system causing a denial of service. Also traversing the empty hash table entries will take increasingly more time. Typically such long lived processes might be TLS clients or TLS servers configured to accept client certificate authentication. The function was added in the OpenSSL 3.0 version thus older releases are not affected by the issue. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2).44NETWORK
CVE‑2022‑14342022‑05‑03 16:15:19MEDIUM (6)The OpenSSL 3.0 implementation of the RC4-MD5 ciphersuite incorrectly uses the AAD data as the MAC key. This makes the MAC key trivially predictable. An attacker could exploit this issue by performing a man-in-the-middle attack to modify data being sent from one endpoint to an OpenSSL 3.0 recipient such that the modified data would still pass the MAC integrity check. Note that data sent from an OpenSSL 3.0 endpoint to a non-OpenSSL 3.0 endpoint will always be rejected by the recipient and the connection will fail at that point. Many application protocols require data to be sent from the client to the server first. Therefore, in such a case, only an OpenSSL 3.0 server would be impacted when talking to a non-OpenSSL 3.0 client. If both endpoints are OpenSSL 3.0 then the attacker could modify data being sent in both directions. In this case both clients and servers could be affected, regardless of the application protocol. Note that in the absence of an attacker this bug means that an OpenSSL 3.0 endpoint communicating with a non-OpenSSL 3.0 endpoint will fail to complete the handshake when using this ciphersuite. The confidentiality of data is not impacted by this issue, i.e. an attacker cannot decrypt data that has been encrypted using this ciphersuite - they can only modify it. In order for this attack to work both endpoints must legitimately negotiate the RC4-MD5 ciphersuite. This ciphersuite is not compiled by default in OpenSSL 3.0, and is not available within the default provider or the default ciphersuite list. This ciphersuite will never be used if TLSv1.3 has been negotiated. In order for an OpenSSL 3.0 endpoint to use this ciphersuite the following must have occurred: 1) OpenSSL must have been compiled with the (non-default) compile time option enable-weak-ssl-ciphers 2) OpenSSL must have had the legacy provider explicitly loaded (either through application code or via configuration) 3) The ciphersuite must have been explicitly added to the ciphersuite list 4) The libssl security level must have been set to 0 (default is 1) 5) A version of SSL/TLS below TLSv1.3 must have been negotiated 6) Both endpoints must negotiate the RC4-MD5 ciphersuite in preference to any others that both endpoints have in common Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2).24NETWORK
CVE‑2022‑13432022‑05‑03 16:15:19MEDIUM (5)The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2).41NETWORK
CVE‑2022‑12922022‑05‑03 16:15:19CRITICAL (10)The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd).46NETWORK
CVE‑2022‑07782022‑03‑15 17:15:09HIGH (8)The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc).44NETWORK
CVE‑2021‑41602022‑01‑28 22:15:15MEDIUM (6)There is a carry propagation bug in the MIPS32 and MIPS64 squaring procedure. Many EC algorithms are affected, including some of the TLS 1.3 default curves. Impact was not analyzed in detail, because the pre-requisites for attack are considered unlikely and include reusing private keys. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be significant. However, for an attack on TLS to be meaningful, the server would have to share the DH private key among multiple clients, which is no longer an option since CVE-2016-0701. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0.0. It was addressed in the releases of 1.1.1m and 3.0.1 on the 15th of December 2021. For the 1.0.2 release it is addressed in git commit 6fc1aaaf3 that is available to premium support customers only. It will be made available in 1.0.2zc when it is released. The issue only affects OpenSSL on MIPS platforms. Fixed in OpenSSL 3.0.1 (Affected 3.0.0). Fixed in OpenSSL 1.1.1m (Affected 1.1.1-1.1.1l). Fixed in OpenSSL 1.0.2zc-dev (Affected 1.0.2-1.0.2zb).24NETWORK
CVE‑2021‑40442021‑12‑14 19:15:08HIGH (8)Internally libssl in OpenSSL calls X509_verify_cert() on the client side to verify a certificate supplied by a server. That function may return a negative return value to indicate an internal error (for example out of memory). Such a negative return value is mishandled by OpenSSL and will cause an IO function (such as SSL_connect() or SSL_do_handshake()) to not indicate success and a subsequent call to SSL_get_error() to return the value SSL_ERROR_WANT_RETRY_VERIFY. This return value is only supposed to be returned by OpenSSL if the application has previously called SSL_CTX_set_cert_verify_callback(). Since most applications do not do this the SSL_ERROR_WANT_RETRY_VERIFY return value from SSL_get_error() will be totally unexpected and applications may not behave correctly as a result. The exact behaviour will depend on the application but it could result in crashes, infinite loops or other similar incorrect responses. This issue is made more serious in combination with a separate bug in OpenSSL 3.0 that will cause X509_verify_cert() to indicate an internal error when processing a certificate chain. This will occur where a certificate does not include the Subject Alternative Name extension but where a Certificate Authority has enforced name constraints. This issue can occur even with valid chains. By combining the two issues an attacker could induce incorrect, application dependent behaviour. Fixed in OpenSSL 3.0.1 (Affected 3.0.0).44NETWORK
CVE‑2021‑37122021‑08‑24 15:15:10HIGH (7)ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not a strict requirement, ASN.1 strings that are parsed using OpenSSL's own "d2i" functions (and other similar parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array by directly setting the "data" and "length" fields in the ASN1_STRING array. This can also happen by using the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for strings that have been directly constructed. Where an application requests an ASN.1 structure to be printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the application without NUL terminating the "data" field, then a read buffer overrun can occur. The same thing can also occur during name constraints processing of certificates (for example if a certificate has been directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack). It could also result in the disclosure of private memory contents (such as private keys, or sensitive plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected 1.0.2-1.0.2y).25NETWORK
CVE‑2021‑37112021‑08‑24 15:15:09CRITICAL (10)In order to decrypt SM2 encrypted data an application is expected to call the API function EVP_PKEY_decrypt(). Typically an application will call this function twice. The first time, on entry, the "out" parameter can be NULL and, on exit, the "outlen" parameter is populated with the buffer size required to hold the decrypted plaintext. The application can then allocate a sufficiently sized buffer and call EVP_PKEY_decrypt() again, but this time passing a non-NULL value for the "out" parameter. A bug in the implementation of the SM2 decryption code means that the calculation of the buffer size required to hold the plaintext returned by the first call to EVP_PKEY_decrypt() can be smaller than the actual size required by the second call. This can lead to a buffer overflow when EVP_PKEY_decrypt() is called by the application a second time with a buffer that is too small. A malicious attacker who is able present SM2 content for decryption to an application could cause attacker chosen data to overflow the buffer by up to a maximum of 62 bytes altering the contents of other data held after the buffer, possibly changing application behaviour or causing the application to crash. The location of the buffer is application dependent but is typically heap allocated. Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k).46NETWORK
CVE‑2021‑34502021‑03‑25 15:15:14HIGH (7)The X509_V_FLAG_X509_STRICT flag enables additional security checks of the certificates present in a certificate chain. It is not set by default. Starting from OpenSSL version 1.1.1h a check to disallow certificates in the chain that have explicitly encoded elliptic curve parameters was added as an additional strict check. An error in the implementation of this check meant that the result of a previous check to confirm that certificates in the chain are valid CA certificates was overwritten. This effectively bypasses the check that non-CA certificates must not be able to issue other certificates. If a "purpose" has been configured then there is a subsequent opportunity for checks that the certificate is a valid CA. All of the named "purpose" values implemented in libcrypto perform this check. Therefore, where a purpose is set the certificate chain will still be rejected even when the strict flag has been used. A purpose is set by default in libssl client and server certificate verification routines, but it can be overridden or removed by an application. In order to be affected, an application must explicitly set the X509_V_FLAG_X509_STRICT verification flag and either not set a purpose for the certificate verification or, in the case of TLS client or server applications, override the default purpose. OpenSSL versions 1.1.1h and newer are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1h-1.1.1j).25NETWORK
CVE‑2021‑34492021‑03‑25 15:15:13MEDIUM (6)An OpenSSL TLS server may crash if sent a maliciously crafted renegotiation ClientHello message from a client. If a TLSv1.2 renegotiation ClientHello omits the signature_algorithms extension (where it was present in the initial ClientHello), but includes a signature_algorithms_cert extension then a NULL pointer dereference will result, leading to a crash and a denial of service attack. A server is only vulnerable if it has TLSv1.2 and renegotiation enabled (which is the default configuration). OpenSSL TLS clients are not impacted by this issue. All OpenSSL 1.1.1 versions are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1-1.1.1j).24NETWORK
CVE‑2021‑238412021‑02‑16 17:15:13MEDIUM (6)The OpenSSL public API function X509_issuer_and_serial_hash() attempts to create a unique hash value based on the issuer and serial number data contained within an X509 certificate. However it fails to correctly handle any errors that may occur while parsing the issuer field (which might occur if the issuer field is maliciously constructed). This may subsequently result in a NULL pointer deref and a crash leading to a potential denial of service attack. The function X509_issuer_and_serial_hash() is never directly called by OpenSSL itself so applications are only vulnerable if they use this function directly and they use it on certificates that may have been obtained from untrusted sources. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x).24NETWORK
CVE‑2021‑238402021‑02‑16 17:15:13HIGH (8)Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument in some cases where the input length is close to the maximum permissable length for an integer on the platform. In such cases the return value from the function call will be 1 (indicating success), but the output length value will be negative. This could cause applications to behave incorrectly or crash. OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x).44NETWORK
CVE‑2021‑238392021‑02‑16 17:15:13LOW (4)OpenSSL 1.0.2 supports SSLv2. If a client attempts to negotiate SSLv2 with a server that is configured to support both SSLv2 and more recent SSL and TLS versions then a check is made for a version rollback attack when unpadding an RSA signature. Clients that support SSL or TLS versions greater than SSLv2 are supposed to use a special form of padding. A server that supports greater than SSLv2 is supposed to reject connection attempts from a client where this special form of padding is present, because this indicates that a version rollback has occurred (i.e. both client and server support greater than SSLv2, and yet this is the version that is being requested). The implementation of this padding check inverted the logic so that the connection attempt is accepted if the padding is present, and rejected if it is absent. This means that such as server will accept a connection if a version rollback attack has occurred. Further the server will erroneously reject a connection if a normal SSLv2 connection attempt is made. Only OpenSSL 1.0.2 servers from version 1.0.2s to 1.0.2x are affected by this issue. In order to be vulnerable a 1.0.2 server must: 1) have configured SSLv2 support at compile time (this is off by default), 2) have configured SSLv2 support at runtime (this is off by default), 3) have configured SSLv2 ciphersuites (these are not in the default ciphersuite list) OpenSSL 1.1.1 does not have SSLv2 support and therefore is not vulnerable to this issue. The underlying error is in the implementation of the RSA_padding_check_SSLv23() function. This also affects the RSA_SSLV23_PADDING padding mode used by various other functions. Although 1.1.1 does not support SSLv2 the RSA_padding_check_SSLv23() function still exists, as does the RSA_SSLV23_PADDING padding mode. Applications that directly call that function or use that padding mode will encounter this issue. However since there is no support for the SSLv2 protocol in 1.1.1 this is considered a bug and not a security issue in that version. OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.0.2y (Affected 1.0.2s-1.0.2x).21NETWORK
CVE‑2020‑70432020‑02‑27 18:15:12CRITICAL (9)An issue was discovered in openfortivpn 1.11.0 when used with OpenSSL before 1.0.2. tunnel.c mishandles certificate validation because hostname comparisons do not consider '\0' characters, as demonstrated by a good.example.com\x00evil.example.com attack.45NETWORK
CVE‑2020‑70422020‑02‑27 18:15:12MEDIUM (5)An issue was discovered in openfortivpn 1.11.0 when used with OpenSSL 1.0.2 or later. tunnel.c mishandles certificate validation because the hostname check operates on uninitialized memory. The outcome is that a valid certificate is never accepted (only a malformed certificate may be accepted).41NETWORK
CVE‑2020‑70412020‑02‑27 18:15:11MEDIUM (5)An issue was discovered in openfortivpn 1.11.0 when used with OpenSSL 1.0.2 or later. tunnel.c mishandles certificate validation because an X509_check_host negative error code is interpreted as a successful return value.41NETWORK
CVE‑2020‑19712020‑12‑08 16:15:12MEDIUM (6)The X.509 GeneralName type is a generic type for representing different types of names. One of those name types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1) Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an attacker can control both items being compared then that attacker could trigger a crash. For example if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a certificate. This checking happens prior to the signatures on the certificate and CRL being verified. OpenSSL's s_server, s_client and verify tools have support for the "-crl_download" option which implements automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue. Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected 1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w).24NETWORK
CVE‑2020‑19682020‑09‑09 14:15:13LOW (4)The Raccoon attack exploits a flaw in the TLS specification which can lead to an attacker being able to compute the pre-master secret in connections which have used a Diffie-Hellman (DH) based ciphersuite. In such a case this would result in the attacker being able to eavesdrop on all encrypted communications sent over that TLS connection. The attack can only be exploited if an implementation re-uses a DH secret across multiple TLS connections. Note that this issue only impacts DH ciphersuites and not ECDH ciphersuites. This issue affects OpenSSL 1.0.2 which is out of support and no longer receiving public updates. OpenSSL 1.1.1 is not vulnerable to this issue. Fixed in OpenSSL 1.0.2w (Affected 1.0.2-1.0.2v).21NETWORK
CVE‑2020‑19672020‑04‑21 14:15:11HIGH (8)Server or client applications that call the SSL_check_chain() function during or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a result of incorrect handling of the "signature_algorithms_cert" TLS extension. The crash occurs if an invalid or unrecognised signature algorithm is received from the peer. This could be exploited by a malicious peer in a Denial of Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this issue. This issue did not affect OpenSSL versions prior to 1.1.1d. Fixed in OpenSSL 1.1.1g (Affected 1.1.1d-1.1.1f).44NETWORK
CVE‑2019‑15632019‑09‑10 17:15:12LOW (4)In situations where an attacker receives automated notification of the success or failure of a decryption attempt an attacker, after sending a very large number of messages to be decrypted, can recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).21NETWORK
CVE‑2019‑15592019‑02‑27 23:29:00MEDIUM (6)If an application encounters a fatal protocol error and then calls SSL_shutdown() twice (once to send a close_notify, and once to receive one) then OpenSSL can respond differently to the calling application if a 0 byte record is received with invalid padding compared to if a 0 byte record is received with an invalid MAC. If the application then behaves differently based on that in a way that is detectable to the remote peer, then this amounts to a padding oracle that could be used to decrypt data. In order for this to be exploitable "non-stitched" ciphersuites must be in use. Stitched ciphersuites are optimised implementations of certain commonly used ciphersuites. Also the application must call SSL_shutdown() twice even if a protocol error has occurred (applications should not do this but some do anyway). Fixed in OpenSSL 1.0.2r (Affected 1.0.2-1.0.2q).24NETWORK
CVE‑2019‑15522019‑07‑30 17:15:13LOW (2)OpenSSL has internal defaults for a directory tree where it can find a configuration file as well as certificates used for verification in TLS. This directory is most commonly referred to as OPENSSLDIR, and is configurable with the --prefix / --openssldir configuration options. For OpenSSL versions 1.1.0 and 1.1.1, the mingw configuration targets assume that resulting programs and libraries are installed in a Unix-like environment and the default prefix for program installation as well as for OPENSSLDIR should be '/usr/local'. However, mingw programs are Windows programs, and as such, find themselves looking at sub-directories of 'C:/usr/local', which may be world writable, which enables untrusted users to modify OpenSSL's default configuration, insert CA certificates, modify (or even replace) existing engine modules, etc. For OpenSSL 1.0.2, '/usr/local/ssl' is used as default for OPENSSLDIR on all Unix and Windows targets, including Visual C builds. However, some build instructions for the diverse Windows targets on 1.0.2 encourage you to specify your own --prefix. OpenSSL versions 1.1.1, 1.1.0 and 1.0.2 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).00LOCAL
CVE‑2019‑15512019‑12‑06 18:15:13MEDIUM (5)There is an overflow bug in the x64_64 Montgomery squaring procedure used in exponentiation with 512-bit moduli. No EC algorithms are affected. Analysis suggests that attacks against 2-prime RSA1024, 3-prime RSA1536, and DSA1024 as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH512 are considered just feasible. However, for an attack the target would have to re-use the DH512 private key, which is not recommended anyway. Also applications directly using the low level API BN_mod_exp may be affected if they use BN_FLG_CONSTTIME. Fixed in OpenSSL 1.1.1e (Affected 1.1.1-1.1.1d). Fixed in OpenSSL 1.0.2u (Affected 1.0.2-1.0.2t).41NETWORK
CVE‑2019‑15492019‑09‑10 17:15:12MEDIUM (5)OpenSSL 1.1.1 introduced a rewritten random number generator (RNG). This was intended to include protection in the event of a fork() system call in order to ensure that the parent and child processes did not share the same RNG state. However this protection was not being used in the default case. A partial mitigation for this issue is that the output from a high precision timer is mixed into the RNG state so the likelihood of a parent and child process sharing state is significantly reduced. If an application already calls OPENSSL_init_crypto() explicitly using OPENSSL_INIT_ATFORK then this problem does not occur at all. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c).41NETWORK
CVE‑2019‑15472019‑09‑10 17:15:12MEDIUM (5)Normally in OpenSSL EC groups always have a co-factor present and this is used in side channel resistant code paths. However, in some cases, it is possible to construct a group using explicit parameters (instead of using a named curve). In those cases it is possible that such a group does not have the cofactor present. This can occur even where all the parameters match a known named curve. If such a curve is used then OpenSSL falls back to non-side channel resistant code paths which may result in full key recovery during an ECDSA signature operation. In order to be vulnerable an attacker would have to have the ability to time the creation of a large number of signatures where explicit parameters with no co-factor present are in use by an application using libcrypto. For the avoidance of doubt libssl is not vulnerable because explicit parameters are never used. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).14LOCAL
CVE‑2019‑15432019‑03‑06 21:29:00MEDIUM (6)ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. OpenSSL versions 1.1.1 and 1.1.0 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1c (Affected 1.1.1-1.1.1b). Fixed in OpenSSL 1.1.0k (Affected 1.1.0-1.1.0j).00NETWORK
CVE‑2019‑01902019‑01‑30 22:29:00HIGH (8)A bug exists in the way mod_ssl handled client renegotiations. A remote attacker could send a carefully crafted request that would cause mod_ssl to enter a loop leading to a denial of service. This bug can be only triggered with Apache HTTP Server version 2.4.37 when using OpenSSL version 1.1.1 or later, due to an interaction in changes to handling of renegotiation attempts.44NETWORK
CVE‑2018‑07392018‑03‑27 21:29:01MEDIUM (4)Constructed ASN.1 types with a recursive definition (such as can be found in PKCS7) could eventually exceed the stack given malicious input with excessive recursion. This could result in a Denial Of Service attack. There are no such structures used within SSL/TLS that come from untrusted sources so this is considered safe. Fixed in OpenSSL 1.1.0h (Affected 1.1.0-1.1.0g). Fixed in OpenSSL 1.0.2o (Affected 1.0.2b-1.0.2n).00NETWORK
CVE‑2018‑07372018‑04‑16 18:29:00MEDIUM (4)The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to a cache timing side channel attack. An attacker with sufficient access to mount cache timing attacks during the RSA key generation process could recover the private key. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2b-1.0.2o).00NETWORK
CVE‑2018‑07352018‑10‑29 13:29:00MEDIUM (6)The OpenSSL ECDSA signature algorithm has been shown to be vulnerable to a timing side channel attack. An attacker could use variations in the signing algorithm to recover the private key. Fixed in OpenSSL 1.1.0j (Affected 1.1.0-1.1.0i). Fixed in OpenSSL 1.1.1a (Affected 1.1.1).24NETWORK
CVE‑2018‑07342018‑10‑30 12:29:00MEDIUM (6)The OpenSSL DSA signature algorithm has been shown to be vulnerable to a timing side channel attack. An attacker could use variations in the signing algorithm to recover the private key. Fixed in OpenSSL 1.1.1a (Affected 1.1.1). Fixed in OpenSSL 1.1.0j (Affected 1.1.0-1.1.0i). Fixed in OpenSSL 1.0.2q (Affected 1.0.2-1.0.2p).24NETWORK
CVE‑2018‑07332018‑03‑27 21:29:01MEDIUM (4)Because of an implementation bug the PA-RISC CRYPTO_memcmp function is effectively reduced to only comparing the least significant bit of each byte. This allows an attacker to forge messages that would be considered as authenticated in an amount of tries lower than that guaranteed by the security claims of the scheme. The module can only be compiled by the HP-UX assembler, so that only HP-UX PA-RISC targets are affected. Fixed in OpenSSL 1.1.0h (Affected 1.1.0-1.1.0g).00NETWORK
CVE‑2018‑07322018‑06‑12 13:29:00HIGH (8)During key agreement in a TLS handshake using a DH(E) based ciphersuite a malicious server can send a very large prime value to the client. This will cause the client to spend an unreasonably long period of time generating a key for this prime resulting in a hang until the client has finished. This could be exploited in a Denial Of Service attack. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2-1.0.2o).44NETWORK
CVE‑2017‑37382017‑12‑07 16:29:00MEDIUM (6)There is an overflow bug in the AVX2 Montgomery multiplication procedure used in exponentiation with 1024-bit moduli. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH1024 are considered just feasible, because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be significant. However, for an attack on TLS to be meaningful, the server would have to share the DH1024 private key among multiple clients, which is no longer an option since CVE-2016-0701. This only affects processors that support the AVX2 but not ADX extensions like Intel Haswell (4th generation). Note: The impact from this issue is similar to CVE-2017-3736, CVE-2017-3732 and CVE-2015-3193. OpenSSL version 1.0.2-1.0.2m and 1.1.0-1.1.0g are affected. Fixed in OpenSSL 1.0.2n. Due to the low severity of this issue we are not issuing a new release of OpenSSL 1.1.0 at this time. The fix will be included in OpenSSL 1.1.0h when it becomes available. The fix is also available in commit e502cc86d in the OpenSSL git repository.24NETWORK
CVE‑2017‑37372017‑12‑07 16:29:00MEDIUM (4)OpenSSL 1.0.2 (starting from version 1.0.2b) introduced an "error state" mechanism. The intent was that if a fatal error occurred during a handshake then OpenSSL would move into the error state and would immediately fail if you attempted to continue the handshake. This works as designed for the explicit handshake functions (SSL_do_handshake(), SSL_accept() and SSL_connect()), however due to a bug it does not work correctly if SSL_read() or SSL_write() is called directly. In that scenario, if the handshake fails then a fatal error will be returned in the initial function call. If SSL_read()/SSL_write() is subsequently called by the application for the same SSL object then it will succeed and the data is passed without being decrypted/encrypted directly from the SSL/TLS record layer. In order to exploit this issue an application bug would have to be present that resulted in a call to SSL_read()/SSL_write() being issued after having already received a fatal error. OpenSSL version 1.0.2b-1.0.2m are affected. Fixed in OpenSSL 1.0.2n. OpenSSL 1.1.0 is not affected.00NETWORK
CVE‑2017‑37362017‑11‑02 17:29:00MEDIUM (4)There is a carry propagating bug in the x86_64 Montgomery squaring procedure in OpenSSL before 1.0.2m and 1.1.0 before 1.1.0g. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be very significant and likely only accessible to a limited number of attackers. An attacker would additionally need online access to an unpatched system using the target private key in a scenario with persistent DH parameters and a private key that is shared between multiple clients. This only affects processors that support the BMI1, BMI2 and ADX extensions like Intel Broadwell (5th generation) and later or AMD Ryzen.00NETWORK
CVE‑2017‑37352017‑08‑28 19:29:01MEDIUM (5)While parsing an IPAddressFamily extension in an X.509 certificate, it is possible to do a one-byte overread. This would result in an incorrect text display of the certificate. This bug has been present since 2006 and is present in all versions of OpenSSL before 1.0.2m and 1.1.0g.00NETWORK
CVE‑2017‑37332017‑05‑04 19:29:00MEDIUM (5)During a renegotiation handshake if the Encrypt-Then-Mac extension is negotiated where it was not in the original handshake (or vice-versa) then this can cause OpenSSL 1.1.0 before 1.1.0e to crash (dependent on ciphersuite). Both clients and servers are affected.00NETWORK
CVE‑2017‑37322017‑05‑04 19:29:00MEDIUM (6)There is a carry propagating bug in the x86_64 Montgomery squaring procedure in OpenSSL 1.0.2 before 1.0.2k and 1.1.0 before 1.1.0d. No EC algorithms are affected. Analysis suggests that attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not believed likely. Attacks against DH are considered just feasible (although very difficult) because most of the work necessary to deduce information about a private key may be performed offline. The amount of resources required for such an attack would be very significant and likely only accessible to a limited number of attackers. An attacker would additionally need online access to an unpatched system using the target private key in a scenario with persistent DH parameters and a private key that is shared between multiple clients. For example this can occur by default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very similar to CVE-2015-3193 but must be treated as a separate problem.24NETWORK
CVE‑2017‑37312017‑05‑04 19:29:00HIGH (8)If an SSL/TLS server or client is running on a 32-bit host, and a specific cipher is being used, then a truncated packet can cause that server or client to perform an out-of-bounds read, usually resulting in a crash. For OpenSSL 1.1.0, the crash can be triggered when using CHACHA20/POLY1305; users should upgrade to 1.1.0d. For Openssl 1.0.2, the crash can be triggered when using RC4-MD5; users who have not disabled that algorithm should update to 1.0.2k.44NETWORK
CVE‑2017‑37302017‑05‑04 19:29:00MEDIUM (5)In OpenSSL 1.1.0 before 1.1.0d, if a malicious server supplies bad parameters for a DHE or ECDHE key exchange then this can result in the client attempting to dereference a NULL pointer leading to a client crash. This could be exploited in a Denial of Service attack.00NETWORK
CVE‑2016‑86102017‑11‑13 22:29:00HIGH (8)A denial of service flaw was found in OpenSSL 0.9.8, 1.0.1, 1.0.2 through 1.0.2h, and 1.1.0 in the way the TLS/SSL protocol defined processing of ALERT packets during a connection handshake. A remote attacker could use this flaw to make a TLS/SSL server consume an excessive amount of CPU and fail to accept connections from other clients.44NETWORK
CVE‑2016‑70562018‑09‑10 16:29:01LOW (2)A timing attack flaw was found in OpenSSL 1.0.1u and before that could allow a malicious user with local access to recover ECDSA P-256 private keys.00LOCAL
CVE‑2016‑70552017‑05‑04 20:29:00MEDIUM (6)There is a carry propagating bug in the Broadwell-specific Montgomery multiplication procedure in OpenSSL 1.0.2 and 1.1.0 before 1.1.0c that handles input lengths divisible by, but longer than 256 bits. Analysis suggests that attacks against RSA, DSA and DH private keys are impossible. This is because the subroutine in question is not used in operations with the private key itself and an input of the attacker's direct choice. Otherwise the bug can manifest itself as transient authentication and key negotiation failures or reproducible erroneous outcome of public-key operations with specially crafted input. Among EC algorithms only Brainpool P-512 curves are affected and one presumably can attack ECDH key negotiation. Impact was not analyzed in detail, because pre-requisites for attack are considered unlikely. Namely multiple clients have to choose the curve in question and the server has to share the private key among them, neither of which is default behaviour. Even then only clients that chose the curve will be affected.24NETWORK
CVE‑2016‑70542017‑05‑04 19:29:00MEDIUM (5)In OpenSSL 1.1.0 before 1.1.0c, TLS connections using *-CHACHA20-POLY1305 ciphersuites are susceptible to a DoS attack by corrupting larger payloads. This can result in an OpenSSL crash. This issue is not considered to be exploitable beyond a DoS.00NETWORK
CVE‑2016‑70532017‑05‑04 19:29:00MEDIUM (5)In OpenSSL 1.1.0 before 1.1.0c, applications parsing invalid CMS structures can crash with a NULL pointer dereference. This is caused by a bug in the handling of the ASN.1 CHOICE type in OpenSSL 1.1.0 which can result in a NULL value being passed to the structure callback if an attempt is made to free certain invalid encodings. Only CHOICE structures using a callback which do not handle NULL value are affected.00NETWORK
CVE‑2016‑70522016‑09‑26 19:59:08HIGH (8)crypto/x509/x509_vfy.c in OpenSSL 1.0.2i allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) by triggering a CRL operation.44NETWORK
CVE‑2016‑63092016‑09‑26 19:59:06HIGH (10)statem/statem.c in OpenSSL 1.1.0a does not consider memory-block movement after a realloc call, which allows remote attackers to cause a denial of service (use-after-free) or possibly execute arbitrary code via a crafted TLS session.00NETWORK
CVE‑2016‑63082016‑09‑26 19:59:05HIGH (7)statem/statem_dtls.c in the DTLS implementation in OpenSSL 1.1.0 before 1.1.0a allocates memory before checking for an excessive length, which might allow remote attackers to cause a denial of service (memory consumption) via crafted DTLS messages.00NETWORK
CVE‑2016‑63072016‑09‑26 19:59:04MEDIUM (4)The state-machine implementation in OpenSSL 1.1.0 before 1.1.0a allocates memory before checking for an excessive length, which might allow remote attackers to cause a denial of service (memory consumption) via crafted TLS messages, related to statem/statem.c and statem/statem_lib.c.00NETWORK
CVE‑2016‑63062016‑09‑26 19:59:03MEDIUM (6)The certificate parser in OpenSSL before 1.0.1u and 1.0.2 before 1.0.2i might allow remote attackers to cause a denial of service (out-of-bounds read) via crafted certificate operations, related to s3_clnt.c and s3_srvr.c.24NETWORK
CVE‑2016‑63052016‑09‑26 19:59:02MEDIUM (5)The ssl3_read_bytes function in record/rec_layer_s3.c in OpenSSL 1.1.0 before 1.1.0a allows remote attackers to cause a denial of service (infinite loop) by triggering a zero-length record in an SSL_peek call.00NETWORK
CVE‑2016‑63042016‑09‑26 19:59:00HIGH (8)Multiple memory leaks in t1_lib.c in OpenSSL before 1.0.1u, 1.0.2 before 1.0.2i, and 1.1.0 before 1.1.0a allow remote attackers to cause a denial of service (memory consumption) via large OCSP Status Request extensions.44NETWORK
CVE‑2016‑63032016‑09‑16 05:59:13CRITICAL (10)Integer overflow in the MDC2_Update function in crypto/mdc2/mdc2dgst.c in OpenSSL before 1.1.0 allows remote attackers to cause a denial of service (out-of-bounds write and application crash) or possibly have unspecified other impact via unknown vectors.46NETWORK
CVE‑2016‑63022016‑09‑16 05:59:12MEDIUM (5)The tls_decrypt_ticket function in ssl/t1_lib.c in OpenSSL before 1.1.0 does not consider the HMAC size during validation of the ticket length, which allows remote attackers to cause a denial of service via a ticket that is too short.00NETWORK
CVE‑2016‑28422016‑03‑03 20:59:05HIGH (10)The doapr_outch function in crypto/bio/b_print.c in OpenSSL 1.0.1 before 1.0.1s and 1.0.2 before 1.0.2g does not verify that a certain memory allocation succeeds, which allows remote attackers to cause a denial of service (out-of-bounds write or memory consumption) or possibly have unspecified other impact via a long string, as demonstrated by a large amount of ASN.1 data, a different vulnerability than CVE-2016-0799.00NETWORK
CVE‑2016‑21832016‑09‑01 00:59:00HIGH (8)The DES and Triple DES ciphers, as used in the TLS, SSH, and IPSec protocols and other protocols and products, have a birthday bound of approximately four billion blocks, which makes it easier for remote attackers to obtain cleartext data via a birthday attack against a long-duration encrypted session, as demonstrated by an HTTPS session using Triple DES in CBC mode, aka a "Sweet32" attack.44NETWORK
CVE‑2016‑21822016‑09‑16 05:59:03HIGH (8)The BN_bn2dec function in crypto/bn/bn_print.c in OpenSSL before 1.1.0 does not properly validate division results, which allows remote attackers to cause a denial of service (out-of-bounds write and application crash) or possibly have unspecified other impact via unknown vectors.00NETWORK
CVE‑2016‑21812016‑09‑16 05:59:01MEDIUM (5)The Anti-Replay feature in the DTLS implementation in OpenSSL before 1.1.0 mishandles early use of a new epoch number in conjunction with a large sequence number, which allows remote attackers to cause a denial of service (false-positive packet drops) via spoofed DTLS records, related to rec_layer_d1.c and ssl3_record.c.00NETWORK
CVE‑2016‑21802016‑08‑01 02:59:11MEDIUM (5)The TS_OBJ_print_bio function in crypto/ts/ts_lib.c in the X.509 Public Key Infrastructure Time-Stamp Protocol (TSP) implementation in OpenSSL through 1.0.2h allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via a crafted time-stamp file that is mishandled by the "openssl ts" command.00NETWORK
CVE‑2016‑21792016‑09‑16 05:59:00MEDIUM (5)The DTLS implementation in OpenSSL before 1.1.0 does not properly restrict the lifetime of queue entries associated with unused out-of-order messages, which allows remote attackers to cause a denial of service (memory consumption) by maintaining many crafted DTLS sessions simultaneously, related to d1_lib.c, statem_dtls.c, statem_lib.c, and statem_srvr.c.00NETWORK
CVE‑2016‑21782016‑06‑20 01:59:03MEDIUM (6)The dsa_sign_setup function in crypto/dsa/dsa_ossl.c in OpenSSL through 1.0.2h does not properly ensure the use of constant-time operations, which makes it easier for local users to discover a DSA private key via a timing side-channel attack.24LOCAL
CVE‑2016‑21772016‑06‑20 01:59:02HIGH (8)OpenSSL through 1.0.2h incorrectly uses pointer arithmetic for heap-buffer boundary checks, which might allow remote attackers to cause a denial of service (integer overflow and application crash) or possibly have unspecified other impact by leveraging unexpected malloc behavior, related to s3_srvr.c, ssl_sess.c, and t1_lib.c.00NETWORK
CVE‑2016‑21762016‑05‑05 01:59:06MEDIUM (6)The X509_NAME_oneline function in crypto/x509/x509_obj.c in OpenSSL before 1.0.1t and 1.0.2 before 1.0.2h allows remote attackers to obtain sensitive information from process stack memory or cause a denial of service (buffer over-read) via crafted EBCDIC ASN.1 data.00NETWORK
CVE‑2016‑21092016‑05‑05 01:59:05HIGH (8)The asn1_d2i_read_bio function in crypto/asn1/a_d2i_fp.c in the ASN.1 BIO implementation in OpenSSL before 1.0.1t and 1.0.2 before 1.0.2h allows remote attackers to cause a denial of service (memory consumption) via a short invalid encoding.00NETWORK
CVE‑2016‑21082016‑05‑05 01:59:04HIGH (10)The ASN.1 implementation in OpenSSL before 1.0.1o and 1.0.2 before 1.0.2c allows remote attackers to execute arbitrary code or cause a denial of service (buffer underflow and memory corruption) via an ANY field in crafted serialized data, aka the "negative zero" issue.00NETWORK
CVE‑2016‑21072016‑05‑05 01:59:03MEDIUM (6)The AES-NI implementation in OpenSSL before 1.0.1t and 1.0.2 before 1.0.2h does not consider memory allocation during a certain padding check, which allows remote attackers to obtain sensitive cleartext information via a padding-oracle attack against an AES CBC session. NOTE: this vulnerability exists because of an incorrect fix for CVE-2013-0169.24NETWORK
CVE‑2016‑21062016‑05‑05 01:59:02MEDIUM (5)Integer overflow in the EVP_EncryptUpdate function in crypto/evp/evp_enc.c in OpenSSL before 1.0.1t and 1.0.2 before 1.0.2h allows remote attackers to cause a denial of service (heap memory corruption) via a large amount of data.00NETWORK
CVE‑2016‑21052016‑05‑05 01:59:01HIGH (8)Integer overflow in the EVP_EncodeUpdate function in crypto/evp/encode.c in OpenSSL before 1.0.1t and 1.0.2 before 1.0.2h allows remote attackers to cause a denial of service (heap memory corruption) via a large amount of binary data.44NETWORK
CVE‑2016‑08002016‑03‑01 20:59:00MEDIUM (4)The SSLv2 protocol, as used in OpenSSL before 1.0.1s and 1.0.2 before 1.0.2g and other products, requires a server to send a ServerVerify message before establishing that a client possesses certain plaintext RSA data, which makes it easier for remote attackers to decrypt TLS ciphertext data by leveraging a Bleichenbacher RSA padding oracle, aka a "DROWN" attack.00NETWORK
CVE‑2016‑07992016‑03‑03 20:59:04HIGH (10)The fmtstr function in crypto/bio/b_print.c in OpenSSL 1.0.1 before 1.0.1s and 1.0.2 before 1.0.2g improperly calculates string lengths, which allows remote attackers to cause a denial of service (overflow and out-of-bounds read) or possibly have unspecified other impact via a long string, as demonstrated by a large amount of ASN.1 data, a different vulnerability than CVE-2016-2842.00NETWORK
CVE‑2016‑07982016‑03‑03 20:59:03HIGH (8)Memory leak in the SRP_VBASE_get_by_user implementation in OpenSSL 1.0.1 before 1.0.1s and 1.0.2 before 1.0.2g allows remote attackers to cause a denial of service (memory consumption) by providing an invalid username in a connection attempt, related to apps/s_server.c and crypto/srp/srp_vfy.c.00NETWORK
CVE‑2016‑07972016‑03‑03 20:59:02HIGH (8)Multiple integer overflows in OpenSSL 1.0.1 before 1.0.1s and 1.0.2 before 1.0.2g allow remote attackers to cause a denial of service (heap memory corruption or NULL pointer dereference) or possibly have unspecified other impact via a long digit string that is mishandled by the (1) BN_dec2bn or (2) BN_hex2bn function, related to crypto/bn/bn.h and crypto/bn/bn_print.c.44NETWORK
CVE‑2016‑07052016‑03‑03 20:59:01HIGH (10)Double free vulnerability in the dsa_priv_decode function in crypto/dsa/dsa_ameth.c in OpenSSL 1.0.1 before 1.0.1s and 1.0.2 before 1.0.2g allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via a malformed DSA private key.00NETWORK
CVE‑2016‑07042016‑03‑02 11:59:01MEDIUM (4)An oracle protection mechanism in the get_client_master_key function in s2_srvr.c in the SSLv2 implementation in OpenSSL before 0.9.8zf, 1.0.0 before 1.0.0r, 1.0.1 before 1.0.1m, and 1.0.2 before 1.0.2a overwrites incorrect MASTER-KEY bytes during use of export cipher suites, which makes it easier for remote attackers to decrypt TLS ciphertext data by leveraging a Bleichenbacher RSA padding oracle, a related issue to CVE-2016-0800.00NETWORK
CVE‑2016‑07032016‑03‑02 11:59:00MEDIUM (4)The get_client_master_key function in s2_srvr.c in the SSLv2 implementation in OpenSSL before 0.9.8zf, 1.0.0 before 1.0.0r, 1.0.1 before 1.0.1m, and 1.0.2 before 1.0.2a accepts a nonzero CLIENT-MASTER-KEY CLEAR-KEY-LENGTH value for an arbitrary cipher, which allows man-in-the-middle attackers to determine the MASTER-KEY value and decrypt TLS ciphertext data by leveraging a Bleichenbacher RSA padding oracle, a related issue to CVE-2016-0800.00NETWORK
CVE‑2016‑07022016‑03‑03 20:59:00MEDIUM (5)The MOD_EXP_CTIME_COPY_FROM_PREBUF function in crypto/bn/bn_exp.c in OpenSSL 1.0.1 before 1.0.1s and 1.0.2 before 1.0.2g does not properly consider cache-bank access times during modular exponentiation, which makes it easier for local users to discover RSA keys by running a crafted application on the same Intel Sandy Bridge CPU core as a victim and leveraging cache-bank conflicts, aka a "CacheBleed" attack.14LOCAL
CVE‑2016‑07012016‑02‑15 02:59:18LOW (3)The DH_check_pub_key function in crypto/dh/dh_check.c in OpenSSL 1.0.2 before 1.0.2f does not ensure that prime numbers are appropriate for Diffie-Hellman (DH) key exchange, which makes it easier for remote attackers to discover a private DH exponent by making multiple handshakes with a peer that chose an inappropriate number, as demonstrated by a number in an X9.42 file.00NETWORK
CVE‑2015‑32162015‑07‑07 10:59:00MEDIUM (4)Race condition in a certain Red Hat patch to the PRNG lock implementation in the ssleay_rand_bytes function in OpenSSL, as distributed in openssl-1.0.1e-25.el7 in Red Hat Enterprise Linux (RHEL) 7 and other products, allows remote attackers to cause a denial of service (application crash) by establishing many TLS sessions to a multithreaded server, leading to use of a negative value for a certain length field.00NETWORK
CVE‑2015‑31972016‑02‑15 02:59:02MEDIUM (4)ssl/s2_srvr.c in OpenSSL 1.0.1 before 1.0.1r and 1.0.2 before 1.0.2f does not prevent use of disabled ciphers, which makes it easier for man-in-the-middle attackers to defeat cryptographic protection mechanisms by performing computations on SSLv2 traffic, related to the get_client_master_key and get_client_hello functions.00NETWORK
CVE‑2015‑31962015‑12‑06 20:59:07MEDIUM (4)ssl/s3_clnt.c in OpenSSL 1.0.0 before 1.0.0t, 1.0.1 before 1.0.1p, and 1.0.2 before 1.0.2d, when used for a multi-threaded client, writes the PSK identity hint to an incorrect data structure, which allows remote servers to cause a denial of service (race condition and double free) via a crafted ServerKeyExchange message.00NETWORK
CVE‑2015‑31952015‑12‑06 20:59:06MEDIUM (5)The ASN1_TFLG_COMBINE implementation in crypto/asn1/tasn_dec.c in OpenSSL before 0.9.8zh, 1.0.0 before 1.0.0t, 1.0.1 before 1.0.1q, and 1.0.2 before 1.0.2e mishandles errors caused by malformed X509_ATTRIBUTE data, which allows remote attackers to obtain sensitive information from process memory by triggering a decoding failure in a PKCS#7 or CMS application.41NETWORK
CVE‑2015‑31942015‑12‑06 20:59:05HIGH (8)crypto/rsa/rsa_ameth.c in OpenSSL 1.0.1 before 1.0.1q and 1.0.2 before 1.0.2e allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via an RSA PSS ASN.1 signature that lacks a mask generation function parameter.44NETWORK
CVE‑2015‑31932015‑12‑06 20:59:03HIGH (8)The Montgomery squaring implementation in crypto/bn/asm/x86_64-mont5.pl in OpenSSL 1.0.2 before 1.0.2e on the x86_64 platform, as used by the BN_mod_exp function, mishandles carry propagation and produces incorrect output, which makes it easier for remote attackers to obtain sensitive private-key information via an attack against use of a (1) Diffie-Hellman (DH) or (2) Diffie-Hellman Ephemeral (DHE) ciphersuite.44NETWORK
CVE‑2015‑17942015‑12‑06 20:59:00MEDIUM (5)The ssl3_get_key_exchange function in ssl/s3_clnt.c in OpenSSL 1.0.2 before 1.0.2e allows remote servers to cause a denial of service (segmentation fault) via a zero p value in an anonymous Diffie-Hellman (DH) ServerKeyExchange message.00NETWORK
CVE‑2015‑17932015‑07‑09 19:17:00MEDIUM (6)The X509_verify_cert function in crypto/x509/x509_vfy.c in OpenSSL 1.0.1n, 1.0.1o, 1.0.2b, and 1.0.2c does not properly process X.509 Basic Constraints cA values during identification of alternative certificate chains, which allows remote attackers to spoof a Certification Authority role and trigger unintended certificate verifications via a valid leaf certificate.00NETWORK
CVE‑2015‑17922015‑06‑12 19:59:05MEDIUM (5)The do_free_upto function in crypto/cms/cms_smime.c in OpenSSL before 0.9.8zg, 1.0.0 before 1.0.0s, 1.0.1 before 1.0.1n, and 1.0.2 before 1.0.2b allows remote attackers to cause a denial of service (infinite loop) via vectors that trigger a NULL value of a BIO data structure, as demonstrated by an unrecognized X.660 OID for a hash function.00NETWORK
CVE‑2015‑17912015‑06‑12 19:59:04MEDIUM (7)Race condition in the ssl3_get_new_session_ticket function in ssl/s3_clnt.c in OpenSSL before 0.9.8zg, 1.0.0 before 1.0.0s, 1.0.1 before 1.0.1n, and 1.0.2 before 1.0.2b, when used for a multi-threaded client, allows remote attackers to cause a denial of service (double free and application crash) or possibly have unspecified other impact by providing a NewSessionTicket during an attempt to reuse a ticket that had been obtained earlier.00NETWORK
CVE‑2015‑17902015‑06‑12 19:59:03MEDIUM (5)The PKCS7_dataDecodefunction in crypto/pkcs7/pk7_doit.c in OpenSSL before 0.9.8zg, 1.0.0 before 1.0.0s, 1.0.1 before 1.0.1n, and 1.0.2 before 1.0.2b allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a PKCS#7 blob that uses ASN.1 encoding and lacks inner EncryptedContent data.00NETWORK
CVE‑2015‑17892015‑06‑12 19:59:03MEDIUM (4)The X509_cmp_time function in crypto/x509/x509_vfy.c in OpenSSL before 0.9.8zg, 1.0.0 before 1.0.0s, 1.0.1 before 1.0.1n, and 1.0.2 before 1.0.2b allows remote attackers to cause a denial of service (out-of-bounds read and application crash) via a crafted length field in ASN1_TIME data, as demonstrated by an attack against a server that supports client authentication with a custom verification callback.00NETWORK
CVE‑2015‑17882015‑06‑12 19:59:02MEDIUM (4)The BN_GF2m_mod_inv function in crypto/bn/bn_gf2m.c in OpenSSL before 0.9.8s, 1.0.0 before 1.0.0e, 1.0.1 before 1.0.1n, and 1.0.2 before 1.0.2b does not properly handle ECParameters structures in which the curve is over a malformed binary polynomial field, which allows remote attackers to cause a denial of service (infinite loop) via a session that uses an Elliptic Curve algorithm, as demonstrated by an attack against a server that supports client authentication.00NETWORK
CVE‑2015‑17872015‑03‑19 22:59:12LOW (3)The ssl3_get_client_key_exchange function in s3_srvr.c in OpenSSL 1.0.2 before 1.0.2a, when client authentication and an ephemeral Diffie-Hellman ciphersuite are enabled, allows remote attackers to cause a denial of service (daemon crash) via a ClientKeyExchange message with a length of zero.00NETWORK
CVE‑2015‑02932015‑03‑19 22:59:12MEDIUM (5)The SSLv2 implementation in OpenSSL before 0.9.8zf, 1.0.0 before 1.0.0r, 1.0.1 before 1.0.1m, and 1.0.2 before 1.0.2a allows remote attackers to cause a denial of service (s2_lib.c assertion failure and daemon exit) via a crafted CLIENT-MASTER-KEY message.00NETWORK
CVE‑2015‑02922015‑03‑19 22:59:11HIGH (8)Integer underflow in the EVP_DecodeUpdate function in crypto/evp/encode.c in the base64-decoding implementation in OpenSSL before 0.9.8za, 1.0.0 before 1.0.0m, and 1.0.1 before 1.0.1h allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via crafted base64 data that triggers a buffer overflow.00NETWORK
CVE‑2015‑02912015‑03‑19 22:59:10MEDIUM (5)The sigalgs implementation in t1_lib.c in OpenSSL 1.0.2 before 1.0.2a allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) by using an invalid signature_algorithms extension in the ClientHello message during a renegotiation.00NETWORK
CVE‑2015‑02902015‑03‑19 22:59:09MEDIUM (5)The multi-block feature in the ssl3_write_bytes function in s3_pkt.c in OpenSSL 1.0.2 before 1.0.2a on 64-bit x86 platforms with AES NI support does not properly handle certain non-blocking I/O cases, which allows remote attackers to cause a denial of service (pointer corruption and application crash) via unspecified vectors.00NETWORK
CVE‑2015‑02892015‑03‑19 22:59:08MEDIUM (5)The PKCS#7 implementation in OpenSSL before 0.9.8zf, 1.0.0 before 1.0.0r, 1.0.1 before 1.0.1m, and 1.0.2 before 1.0.2a does not properly handle a lack of outer ContentInfo, which allows attackers to cause a denial of service (NULL pointer dereference and application crash) by leveraging an application that processes arbitrary PKCS#7 data and providing malformed data with ASN.1 encoding, related to crypto/pkcs7/pk7_doit.c and crypto/pkcs7/pk7_lib.c.00NETWORK
CVE‑2015‑02882015‑03‑19 22:59:07MEDIUM (5)The X509_to_X509_REQ function in crypto/x509/x509_req.c in OpenSSL before 0.9.8zf, 1.0.0 before 1.0.0r, 1.0.1 before 1.0.1m, and 1.0.2 before 1.0.2a might allow attackers to cause a denial of service (NULL pointer dereference and application crash) via an invalid certificate key.00NETWORK
CVE‑2015‑02872015‑03‑19 22:59:06MEDIUM (5)The ASN1_item_ex_d2i function in crypto/asn1/tasn_dec.c in OpenSSL before 0.9.8zf, 1.0.0 before 1.0.0r, 1.0.1 before 1.0.1m, and 1.0.2 before 1.0.2a does not reinitialize CHOICE and ADB data structures, which might allow attackers to cause a denial of service (invalid write operation and memory corruption) by leveraging an application that relies on ASN.1 structure reuse.00NETWORK
CVE‑2015‑02862015‑03‑19 22:59:05MEDIUM (5)The ASN1_TYPE_cmp function in crypto/asn1/a_type.c in OpenSSL before 0.9.8zf, 1.0.0 before 1.0.0r, 1.0.1 before 1.0.1m, and 1.0.2 before 1.0.2a does not properly perform boolean-type comparisons, which allows remote attackers to cause a denial of service (invalid read operation and application crash) via a crafted X.509 certificate to an endpoint that uses the certificate-verification feature.00NETWORK
CVE‑2015‑02852015‑03‑19 22:59:04MEDIUM (4)The ssl3_client_hello function in s3_clnt.c in OpenSSL 1.0.2 before 1.0.2a does not ensure that the PRNG is seeded before proceeding with a handshake, which makes it easier for remote attackers to defeat cryptographic protection mechanisms by sniffing the network and then conducting a brute-force attack.00NETWORK
CVE‑2015‑02092015‑03‑19 22:59:03MEDIUM (7)Use-after-free vulnerability in the d2i_ECPrivateKey function in crypto/ec/ec_asn1.c in OpenSSL before 0.9.8zf, 1.0.0 before 1.0.0r, 1.0.1 before 1.0.1m, and 1.0.2 before 1.0.2a might allow remote attackers to cause a denial of service (memory corruption and application crash) or possibly have unspecified other impact via a malformed Elliptic Curve (EC) private-key file that is improperly handled during import.00NETWORK
CVE‑2015‑02082015‑03‑19 22:59:01MEDIUM (4)The ASN.1 signature-verification implementation in the rsa_item_verify function in crypto/rsa/rsa_ameth.c in OpenSSL 1.0.2 before 1.0.2a allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via crafted RSA PSS parameters to an endpoint that uses the certificate-verification feature.00NETWORK
CVE‑2015‑02072015‑03‑19 22:59:00MEDIUM (5)The dtls1_listen function in d1_lib.c in OpenSSL 1.0.2 before 1.0.2a does not properly isolate the state information of independent data streams, which allows remote attackers to cause a denial of service (application crash) via crafted DTLS traffic, as demonstrated by DTLS 1.0 traffic to a DTLS 1.2 server.00NETWORK
CVE‑2015‑02062015‑01‑09 02:59:12MEDIUM (5)Memory leak in the dtls1_buffer_record function in d1_pkt.c in OpenSSL 1.0.0 before 1.0.0p and 1.0.1 before 1.0.1k allows remote attackers to cause a denial of service (memory consumption) by sending many duplicate records for the next epoch, leading to failure of replay detection.00NETWORK
CVE‑2015‑02052015‑01‑09 02:59:11MEDIUM (5)The ssl3_get_cert_verify function in s3_srvr.c in OpenSSL 1.0.0 before 1.0.0p and 1.0.1 before 1.0.1k accepts client authentication with a Diffie-Hellman (DH) certificate without requiring a CertificateVerify message, which allows remote attackers to obtain access without knowledge of a private key via crafted TLS Handshake Protocol traffic to a server that recognizes a Certification Authority with DH support.00NETWORK
CVE‑2015‑02042015‑01‑09 02:59:10MEDIUM (4)The ssl3_get_key_exchange function in s3_clnt.c in OpenSSL before 0.9.8zd, 1.0.0 before 1.0.0p, and 1.0.1 before 1.0.1k allows remote SSL servers to conduct RSA-to-EXPORT_RSA downgrade attacks and facilitate brute-force decryption by offering a weak ephemeral RSA key in a noncompliant role, related to the "FREAK" issue. NOTE: the scope of this CVE is only client code based on OpenSSL, not EXPORT_RSA issues associated with servers or other TLS implementations.00NETWORK
CVE‑2014‑82752015‑01‑09 02:59:09MEDIUM (5)OpenSSL before 0.9.8zd, 1.0.0 before 1.0.0p, and 1.0.1 before 1.0.1k does not enforce certain constraints on certificate data, which allows remote attackers to defeat a fingerprint-based certificate-blacklist protection mechanism by including crafted data within a certificate's unsigned portion, related to crypto/asn1/a_verify.c, crypto/dsa/dsa_asn1.c, crypto/ecdsa/ecs_vrf.c, and crypto/x509/x_all.c.00NETWORK
CVE‑2014‑81762015‑06‑12 19:59:00HIGH (8)The dtls1_clear_queues function in ssl/d1_lib.c in OpenSSL before 0.9.8za, 1.0.0 before 1.0.0m, and 1.0.1 before 1.0.1h frees data structures without considering that application data can arrive between a ChangeCipherSpec message and a Finished message, which allows remote DTLS peers to cause a denial of service (memory corruption and application crash) or possibly have unspecified other impact via unexpected application data.00NETWORK
CVE‑2014‑51392014‑08‑13 23:55:08MEDIUM (4)The ssl_set_client_disabled function in t1_lib.c in OpenSSL 1.0.1 before 1.0.1i allows remote SSL servers to cause a denial of service (NULL pointer dereference and client application crash) via a ServerHello message that includes an SRP ciphersuite without the required negotiation of that ciphersuite with the client.00NETWORK
CVE‑2014‑35722015‑01‑09 02:59:02MEDIUM (5)The ssl3_get_key_exchange function in s3_clnt.c in OpenSSL before 0.9.8zd, 1.0.0 before 1.0.0p, and 1.0.1 before 1.0.1k allows remote SSL servers to conduct ECDHE-to-ECDH downgrade attacks and trigger a loss of forward secrecy by omitting the ServerKeyExchange message.00NETWORK
CVE‑2014‑35712015‑01‑09 02:59:01MEDIUM (5)OpenSSL before 0.9.8zd, 1.0.0 before 1.0.0p, and 1.0.1 before 1.0.1k allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted DTLS message that is processed with a different read operation for the handshake header than for the handshake body, related to the dtls1_get_record function in d1_pkt.c and the ssl3_read_n function in s3_pkt.c.00NETWORK
CVE‑2014‑35702015‑01‑09 02:59:00MEDIUM (5)The BN_sqr implementation in OpenSSL before 0.9.8zd, 1.0.0 before 1.0.0p, and 1.0.1 before 1.0.1k does not properly calculate the square of a BIGNUM value, which might make it easier for remote attackers to defeat cryptographic protection mechanisms via unspecified vectors, related to crypto/bn/asm/mips.pl, crypto/bn/asm/x86_64-gcc.c, and crypto/bn/bn_asm.c.00NETWORK
CVE‑2014‑35692014‑12‑24 11:59:00MEDIUM (5)The ssl23_get_client_hello function in s23_srvr.c in OpenSSL 0.9.8zc, 1.0.0o, and 1.0.1j does not properly handle attempts to use unsupported protocols, which allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an unexpected handshake, as demonstrated by an SSLv3 handshake to a no-ssl3 application with certain error handling. NOTE: this issue became relevant after the CVE-2014-3568 fix.00NETWORK
CVE‑2014‑35682014‑10‑19 01:55:14MEDIUM (4)OpenSSL before 0.9.8zc, 1.0.0 before 1.0.0o, and 1.0.1 before 1.0.1j does not properly enforce the no-ssl3 build option, which allows remote attackers to bypass intended access restrictions via an SSL 3.0 handshake, related to s23_clnt.c and s23_srvr.c.00NETWORK
CVE‑2014‑35672014‑10‑19 01:55:14HIGH (7)Memory leak in the tls_decrypt_ticket function in t1_lib.c in OpenSSL before 0.9.8zc, 1.0.0 before 1.0.0o, and 1.0.1 before 1.0.1j allows remote attackers to cause a denial of service (memory consumption) via a crafted session ticket that triggers an integrity-check failure.00NETWORK
CVE‑2014‑35662014‑10‑15 00:55:02LOW (3)The SSL protocol 3.0, as used in OpenSSL through 1.0.1i and other products, uses nondeterministic CBC padding, which makes it easier for man-in-the-middle attackers to obtain cleartext data via a padding-oracle attack, aka the "POODLE" issue.21NETWORK
CVE‑2014‑35132014‑10‑19 01:55:14HIGH (7)Memory leak in d1_srtp.c in the DTLS SRTP extension in OpenSSL 1.0.1 before 1.0.1j allows remote attackers to cause a denial of service (memory consumption) via a crafted handshake message.00NETWORK
CVE‑2014‑35122014‑08‑13 23:55:08HIGH (8)Multiple buffer overflows in crypto/srp/srp_lib.c in the SRP implementation in OpenSSL 1.0.1 before 1.0.1i allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via an invalid SRP (1) g, (2) A, or (3) B parameter.00NETWORK
CVE‑2014‑35112014‑08‑13 23:55:08MEDIUM (4)The ssl23_get_client_hello function in s23_srvr.c in OpenSSL 1.0.1 before 1.0.1i allows man-in-the-middle attackers to force the use of TLS 1.0 by triggering ClientHello message fragmentation in communication between a client and server that both support later TLS versions, related to a "protocol downgrade" issue.00NETWORK
CVE‑2014‑35102014‑08‑13 23:55:08MEDIUM (4)The ssl3_send_client_key_exchange function in s3_clnt.c in OpenSSL 0.9.8 before 0.9.8zb, 1.0.0 before 1.0.0n, and 1.0.1 before 1.0.1i allows remote DTLS servers to cause a denial of service (NULL pointer dereference and client application crash) via a crafted handshake message in conjunction with a (1) anonymous DH or (2) anonymous ECDH ciphersuite.00NETWORK
CVE‑2014‑35092014‑08‑13 23:55:08MEDIUM (7)Race condition in the ssl_parse_serverhello_tlsext function in t1_lib.c in OpenSSL 1.0.0 before 1.0.0n and 1.0.1 before 1.0.1i, when multithreading and session resumption are used, allows remote SSL servers to cause a denial of service (memory overwrite and client application crash) or possibly have unspecified other impact by sending Elliptic Curve (EC) Supported Point Formats Extension data.00NETWORK
CVE‑2014‑35082014‑08‑13 23:55:07MEDIUM (4)The OBJ_obj2txt function in crypto/objects/obj_dat.c in OpenSSL 0.9.8 before 0.9.8zb, 1.0.0 before 1.0.0n, and 1.0.1 before 1.0.1i, when pretty printing is used, does not ensure the presence of '\0' characters, which allows context-dependent attackers to obtain sensitive information from process stack memory by reading output from X509_name_oneline, X509_name_print_ex, and unspecified other functions.00NETWORK
CVE‑2014‑35072014‑08‑13 23:55:07MEDIUM (5)Memory leak in d1_both.c in the DTLS implementation in OpenSSL 0.9.8 before 0.9.8zb, 1.0.0 before 1.0.0n, and 1.0.1 before 1.0.1i allows remote attackers to cause a denial of service (memory consumption) via zero-length DTLS fragments that trigger improper handling of the return value of a certain insert function.00NETWORK
CVE‑2014‑35062014‑08‑13 23:55:07MEDIUM (5)d1_both.c in the DTLS implementation in OpenSSL 0.9.8 before 0.9.8zb, 1.0.0 before 1.0.0n, and 1.0.1 before 1.0.1i allows remote attackers to cause a denial of service (memory consumption) via crafted DTLS handshake messages that trigger memory allocations corresponding to large length values.00NETWORK
CVE‑2014‑35052014‑08‑13 23:55:07MEDIUM (5)Double free vulnerability in d1_both.c in the DTLS implementation in OpenSSL 0.9.8 before 0.9.8zb, 1.0.0 before 1.0.0n, and 1.0.1 before 1.0.1i allows remote attackers to cause a denial of service (application crash) via crafted DTLS packets that trigger an error condition.00NETWORK
CVE‑2014‑34702014‑06‑05 21:55:08MEDIUM (4)The ssl3_send_client_key_exchange function in s3_clnt.c in OpenSSL before 0.9.8za, 1.0.0 before 1.0.0m, and 1.0.1 before 1.0.1h, when an anonymous ECDH cipher suite is used, allows remote attackers to cause a denial of service (NULL pointer dereference and client crash) by triggering a NULL certificate value.00NETWORK
CVE‑2014‑02242014‑06‑05 21:55:08HIGH (7)OpenSSL before 0.9.8za, 1.0.0 before 1.0.0m, and 1.0.1 before 1.0.1h does not properly restrict processing of ChangeCipherSpec messages, which allows man-in-the-middle attackers to trigger use of a zero-length master key in certain OpenSSL-to-OpenSSL communications, and consequently hijack sessions or obtain sensitive information, via a crafted TLS handshake, aka the "CCS Injection" vulnerability.25NETWORK
CVE‑2014‑02212014‑06‑05 21:55:06MEDIUM (4)The dtls1_get_message_fragment function in d1_both.c in OpenSSL before 0.9.8za, 1.0.0 before 1.0.0m, and 1.0.1 before 1.0.1h allows remote attackers to cause a denial of service (recursion and client crash) via a DTLS hello message in an invalid DTLS handshake.00NETWORK
CVE‑2014‑01982014‑05‑06 10:44:05MEDIUM (4)The do_ssl3_write function in s3_pkt.c in OpenSSL 1.x through 1.0.1g, when SSL_MODE_RELEASE_BUFFERS is enabled, does not properly manage a buffer pointer during certain recursive calls, which allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via vectors that trigger an alert condition.00NETWORK
CVE‑2014‑01952014‑06‑05 21:55:06MEDIUM (7)The dtls1_reassemble_fragment function in d1_both.c in OpenSSL before 0.9.8za, 1.0.0 before 1.0.0m, and 1.0.1 before 1.0.1h does not properly validate fragment lengths in DTLS ClientHello messages, which allows remote attackers to execute arbitrary code or cause a denial of service (buffer overflow and application crash) via a long non-initial fragment.00NETWORK
CVE‑2014‑01602014‑04‑07 22:55:04HIGH (8)The (1) TLS and (2) DTLS implementations in OpenSSL 1.0.1 before 1.0.1g do not properly handle Heartbeat Extension packets, which allows remote attackers to obtain sensitive information from process memory via crafted packets that trigger a buffer over-read, as demonstrated by reading private keys, related to d1_both.c and t1_lib.c, aka the Heartbleed bug.44NETWORK
CVE‑2014‑00762014‑03‑25 13:25:22LOW (2)The Montgomery ladder implementation in OpenSSL through 1.0.0l does not ensure that certain swap operations have a constant-time behavior, which makes it easier for local users to obtain ECDSA nonces via a FLUSH+RELOAD cache side-channel attack.00LOCAL
CVE‑2013‑64502014‑01‑01 16:05:15MEDIUM (6)The DTLS retransmission implementation in OpenSSL 1.0.0 before 1.0.0l and 1.0.1 before 1.0.1f does not properly maintain data structures for digest and encryption contexts, which might allow man-in-the-middle attackers to trigger the use of a different context and cause a denial of service (application crash) by interfering with packet delivery, related to ssl/d1_both.c and ssl/t1_enc.c.00NETWORK
CVE‑2013‑64492013‑12‑23 22:55:03MEDIUM (4)The ssl_get_algorithm2 function in ssl/s3_lib.c in OpenSSL before 1.0.2 obtains a certain version number from an incorrect data structure, which allows remote attackers to cause a denial of service (daemon crash) via crafted traffic from a TLS 1.2 client.00NETWORK
CVE‑2013‑43532014‑01‑09 01:55:03MEDIUM (4)The ssl3_take_mac function in ssl/s3_both.c in OpenSSL 1.0.1 before 1.0.1f allows remote TLS servers to cause a denial of service (NULL pointer dereference and application crash) via a crafted Next Protocol Negotiation record in a TLS handshake.00NETWORK
CVE‑2013‑01692013‑02‑08 19:55:01LOW (3)The TLS protocol 1.1 and 1.2 and the DTLS protocol 1.0 and 1.2, as used in OpenSSL, OpenJDK, PolarSSL, and other products, do not properly consider timing side-channel attacks on a MAC check requirement during the processing of malformed CBC padding, which allows remote attackers to conduct distinguishing attacks and plaintext-recovery attacks via statistical analysis of timing data for crafted packets, aka the "Lucky Thirteen" issue.00NETWORK
CVE‑2013‑01662013‑02‑08 19:55:01MEDIUM (5)OpenSSL before 0.9.8y, 1.0.0 before 1.0.0k, and 1.0.1 before 1.0.1d does not properly perform signature verification for OCSP responses, which allows remote OCSP servers to cause a denial of service (NULL pointer dereference and application crash) via an invalid key.00NETWORK
CVE‑2012‑26862013‑02‑08 19:55:01MEDIUM (5)crypto/evp/e_aes_cbc_hmac_sha1.c in the AES-NI functionality in the TLS 1.1 and 1.2 implementations in OpenSSL 1.0.1 before 1.0.1d allows remote attackers to cause a denial of service (application crash) via crafted CBC data.00NETWORK
CVE‑2012‑23332012‑05‑14 22:55:03MEDIUM (7)Integer underflow in OpenSSL before 0.9.8x, 1.0.0 before 1.0.0j, and 1.0.1 before 1.0.1c, when TLS 1.1, TLS 1.2, or DTLS is used with CBC encryption, allows remote attackers to cause a denial of service (buffer over-read) or possibly have unspecified other impact via a crafted TLS packet that is not properly handled during a certain explicit IV calculation.00NETWORK
CVE‑2012‑21312012‑04‑24 20:55:03HIGH (8)Multiple integer signedness errors in crypto/buffer/buffer.c in OpenSSL 0.9.8v allow remote attackers to conduct buffer overflow attacks, and cause a denial of service (memory corruption) or possibly have unspecified other impact, via crafted DER data, as demonstrated by an X.509 certificate or an RSA public key. NOTE: this vulnerability exists because of an incomplete fix for CVE-2012-2110.00NETWORK
CVE‑2012‑21102012‑04‑19 17:55:01HIGH (8)The asn1_d2i_read_bio function in crypto/asn1/a_d2i_fp.c in OpenSSL before 0.9.8v, 1.0.0 before 1.0.0i, and 1.0.1 before 1.0.1a does not properly interpret integer data, which allows remote attackers to conduct buffer overflow attacks, and cause a denial of service (memory corruption) or possibly have unspecified other impact, via crafted DER data, as demonstrated by an X.509 certificate or an RSA public key.00NETWORK
CVE‑2012‑11652012‑03‑15 17:55:01MEDIUM (5)The mime_param_cmp function in crypto/asn1/asn_mime.c in OpenSSL before 0.9.8u and 1.x before 1.0.0h allows remote attackers to cause a denial of service (NULL pointer dereference and application crash) via a crafted S/MIME message, a different vulnerability than CVE-2006-7250.00NETWORK
CVE‑2012‑08842012‑03‑13 03:12:26MEDIUM (5)The implementation of Cryptographic Message Syntax (CMS) and PKCS #7 in OpenSSL before 0.9.8u and 1.x before 1.0.0h does not properly restrict certain oracle behavior, which makes it easier for context-dependent attackers to decrypt data via a Million Message Attack (MMA) adaptive chosen ciphertext attack.00NETWORK
CVE‑2012‑00502012‑01‑19 19:55:01MEDIUM (5)OpenSSL 0.9.8s and 1.0.0f does not properly support DTLS applications, which allows remote attackers to cause a denial of service (crash) via unspecified vectors related to an out-of-bounds read. NOTE: this vulnerability exists because of an incorrect fix for CVE-2011-4108.00NETWORK
CVE‑2012‑00272012‑01‑06 01:55:01MEDIUM (5)The GOST ENGINE in OpenSSL before 1.0.0f does not properly handle invalid parameters for the GOST block cipher, which allows remote attackers to cause a denial of service (daemon crash) via crafted data from a TLS client.00NETWORK
CVE‑2011‑50952012‑06‑20 17:55:02MEDIUM (4)The Diffie-Hellman key-exchange implementation in OpenSSL 0.9.8, when FIPS mode is enabled, does not properly validate a public parameter, which makes it easier for man-in-the-middle attackers to obtain the shared secret key by modifying network traffic, a related issue to CVE-2011-1923.00NETWORK
CVE‑2011‑46192012‑01‑06 01:55:01MEDIUM (5)The Server Gated Cryptography (SGC) implementation in OpenSSL before 0.9.8s and 1.x before 1.0.0f does not properly handle handshake restarts, which allows remote attackers to cause a denial of service (CPU consumption) via unspecified vectors.00NETWORK
CVE‑2011‑45772012‑01‑06 01:55:01MEDIUM (4)OpenSSL before 0.9.8s and 1.x before 1.0.0f, when RFC 3779 support is enabled, allows remote attackers to cause a denial of service (assertion failure) via an X.509 certificate containing certificate-extension data associated with (1) IP address blocks or (2) Autonomous System (AS) identifiers.00NETWORK
CVE‑2011‑45762012‑01‑06 01:55:01MEDIUM (5)The SSL 3.0 implementation in OpenSSL before 0.9.8s and 1.x before 1.0.0f does not properly initialize data structures for block cipher padding, which might allow remote attackers to obtain sensitive information by decrypting the padding data sent by an SSL peer.00NETWORK
CVE‑2011‑43542012‑01‑27 00:55:01MEDIUM (6)crypto/bn/bn_nist.c in OpenSSL before 0.9.8h on 32-bit platforms, as used in stunnel and other products, in certain circumstances involving ECDH or ECDHE cipher suites, uses an incorrect modular reduction algorithm in its implementation of the P-256 and P-384 NIST elliptic curves, which allows remote attackers to obtain the private key of a TLS server via multiple handshake attempts.00NETWORK
CVE‑2011‑41092012‑01‑06 01:55:01HIGH (9)Double free vulnerability in OpenSSL 0.9.8 before 0.9.8s, when X509_V_FLAG_POLICY_CHECK is enabled, allows remote attackers to have an unspecified impact by triggering failure of a policy check.00NETWORK
CVE‑2011‑41082012‑01‑06 01:55:01MEDIUM (4)The DTLS implementation in OpenSSL before 0.9.8s and 1.x before 1.0.0f performs a MAC check only if certain padding is valid, which makes it easier for remote attackers to recover plaintext via a padding oracle attack.00NETWORK
CVE‑2011‑32102011‑09‑22 10:55:04MEDIUM (5)The ephemeral ECDH ciphersuite functionality in OpenSSL 0.9.8 through 0.9.8r and 1.0.x before 1.0.0e does not ensure thread safety during processing of handshake messages from clients, which allows remote attackers to cause a denial of service (daemon crash) via out-of-order messages that violate the TLS protocol.00NETWORK
CVE‑2011‑32072011‑09‑22 10:55:03MEDIUM (5)crypto/x509/x509_vfy.c in OpenSSL 1.0.x before 1.0.0e does not initialize certain structure members, which makes it easier for remote attackers to bypass CRL validation by using a nextUpdate value corresponding to a time in the past.00NETWORK
CVE‑2011‑19452011‑05‑31 20:55:05LOW (3)The elliptic curve cryptography (ECC) subsystem in OpenSSL 1.0.0d and earlier, when the Elliptic Curve Digital Signature Algorithm (ECDSA) is used for the ECDHE_ECDSA cipher suite, does not properly implement curves over binary fields, which makes it easier for context-dependent attackers to determine private keys via a timing attack and a lattice calculation.00NETWORK
CVE‑2011‑14732012‑06‑16 21:55:02MEDIUM (5)OpenSSL before 0.9.8l, and 0.9.8m through 1.x, does not properly restrict client-initiated renegotiation within the SSL and TLS protocols, which might make it easier for remote attackers to cause a denial of service (CPU consumption) by performing many renegotiations within a single connection, a different vulnerability than CVE-2011-5094. NOTE: it can also be argued that it is the responsibility of server deployments, not a security library, to prevent or limit renegotiation when it is inappropriate within a specific environment00NETWORK
CVE‑2011‑00142011‑02‑19 01:00:02MEDIUM (5)ssl/t1_lib.c in OpenSSL 0.9.8h through 0.9.8q and 1.0.0 through 1.0.0c allows remote attackers to cause a denial of service (crash), and possibly obtain sensitive information in applications that use OpenSSL, via a malformed ClientHello handshake message that triggers an out-of-bounds memory access, aka "OCSP stapling vulnerability."00NETWORK
CVE‑2010‑52982014‑04‑14 22:38:09MEDIUM (4)Race condition in the ssl3_read_bytes function in s3_pkt.c in OpenSSL through 1.0.1g, when SSL_MODE_RELEASE_BUFFERS is enabled, allows remote attackers to inject data across sessions or cause a denial of service (use-after-free and parsing error) via an SSL connection in a multithreaded environment.00NETWORK
CVE‑2010‑42522010‑12‑06 21:05:49HIGH (8)OpenSSL before 1.0.0c, when J-PAKE is enabled, does not properly validate the public parameters in the J-PAKE protocol, which allows remote attackers to bypass the need for knowledge of the shared secret, and successfully authenticate, by sending crafted values in each round of the protocol.00NETWORK
CVE‑2010‑41802010‑12‑06 21:05:49MEDIUM (4)OpenSSL before 0.9.8q, and 1.0.x before 1.0.0c, when SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG is enabled, does not properly prevent modification of the ciphersuite in the session cache, which allows remote attackers to force the downgrade to an unintended cipher via vectors involving sniffing network traffic to discover a session identifier.00NETWORK
CVE‑2010‑38642010‑11‑17 16:00:02HIGH (8)Multiple race conditions in ssl/t1_lib.c in OpenSSL 0.9.8f through 0.9.8o, 1.0.0, and 1.0.0a, when multi-threading and internal caching are enabled on a TLS server, might allow remote attackers to execute arbitrary code via client data that triggers a heap-based buffer overflow, related to (1) the TLS server name extension and (2) elliptic curve cryptography.00NETWORK
CVE‑2010‑29392010‑08‑17 20:00:04MEDIUM (4)Double free vulnerability in the ssl3_get_key_exchange function in the OpenSSL client (ssl/s3_clnt.c) in OpenSSL 1.0.0a, 0.9.8, 0.9.7, and possibly other versions, when using ECDH, allows context-dependent attackers to cause a denial of service (crash) and possibly execute arbitrary code via a crafted private key with an invalid prime. NOTE: some sources refer to this as a use-after-free issue.00NETWORK
CVE‑2010‑16332010‑06‑03 14:30:02MEDIUM (6)RSA verification recovery in the EVP_PKEY_verify_recover function in OpenSSL 1.x before 1.0.0a, as used by pkeyutl and possibly other applications, returns uninitialized memory upon failure, which might allow context-dependent attackers to bypass intended key requirements or obtain sensitive information via unspecified vectors. NOTE: some of these details are obtained from third party information.00NETWORK
CVE‑2010‑09282010‑03‑05 19:30:01MEDIUM (4)OpenSSL 0.9.8i on the Gaisler Research LEON3 SoC on the Xilinx Virtex-II Pro FPGA uses a Fixed Width Exponentiation (FWE) algorithm for certain signature calculations, and does not verify the signature before providing it to a caller, which makes it easier for physically proximate attackers to determine the private key via a modified supply voltage for the microprocessor, related to a "fault-based attack."00LOCAL
CVE‑2010‑07422010‑06‑03 14:30:02HIGH (8)The Cryptographic Message Syntax (CMS) implementation in crypto/cms/cms_asn1.c in OpenSSL before 0.9.8o and 1.x before 1.0.0a does not properly handle structures that contain OriginatorInfo, which allows context-dependent attackers to modify invalid memory locations or conduct double-free attacks, and possibly execute arbitrary code, via unspecified vectors.00NETWORK
CVE‑2010‑07402010‑03‑26 18:30:00MEDIUM (5)The ssl3_get_record function in ssl/s3_pkt.c in OpenSSL 0.9.8f through 0.9.8m allows remote attackers to cause a denial of service (crash) via a malformed record in a TLS connection that triggers a NULL pointer dereference, related to the minor version number. NOTE: some of these details are obtained from third party information.00NETWORK
CVE‑2010‑04332010‑03‑05 19:30:01MEDIUM (4)The kssl_keytab_is_available function in ssl/kssl.c in OpenSSL before 0.9.8n, when Kerberos is enabled but Kerberos configuration files cannot be opened, does not check a certain return value, which allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via SSL cipher negotiation, as demonstrated by a chroot installation of Dovecot or stunnel without Kerberos configuration files inside the chroot.00NETWORK
...
...
Lavawall Computer Listing
Lavawall patch grid
Lavawall MSP Overview Dashboard
Lavawall patch grid

Get the IT stuff done that nobody wants to do.

Patch more applications, achieve compliance, and prevent problems while reducing stress with Lavawall®.

Security First

A security tool by security auditors. From Passkeys and Argon2i to source validation and MVSP principles, Lavawall® has you covered.

Constant Improvement

More features and more security added nearly every day.

More patchable programs added every week

While Ninite and other patching tools have had the same patch offerings for decades, we're monitoring stats to keep adding the most useful prorgams.

Details matter

From wrapping TLS communications in extra encryption and uninstalling remote support tools when they aren't used to detailed statistical analysis of system and network performance, Lavawall® goes in-depth.

Chromium extensions and Notification Validation

Lavawall®p; goes beyond patches and breach detection. We also monitor for risky Chromium extensions and allowed notifications that might be part of a phishing or ransomware attack.

Extended Cloud Security

Extend the security features of Cloudflare, Microsoft, Google, Sophos, and other cloud providers to create a Lavawall® of protection

Secure Remote Management

Even if you used breached remote management tools like ScreenConnect through Lavawall® when it was vulnerable, your computers stayed safe because we only install the agent when it needs to be used.

Integrations and automation

Easily deploy, monitor, and analyze security tools like Huntress, AutoElevate, and Sophos. Magically gain details from ZenDesk, ConnectWise, Datto, Panorama9, Microsoft, and Google.

Human and automated support

Get immediate fixes, user notifications, admin notifications -- and even security-certified human level 3 support when our advanced statistical analysis confirms a problem or anomaly.

We are constantly improving the Lavawall® tools to add more value. Some of our most recent changes include:
2024‑10‑300.12.8.195Mac update refinements
2024‑10‑250.12.3.190
2024‑10‑210.12.0.187Macos implementaiton, linux and windows improvements
2024‑10‑160.11.128.186Linux stats and system information improvements, improvements for application shutdown
2024‑09‑120.11.113.171CPU Optimizations and Packages reliability improvements
2024‑09‑050.11.106.164Phased deployment enhancements
2024‑09‑040.11.103.161
2024‑09‑020.11.102.160CPU Optimizations and Packages reliability improvements
2024‑08‑300.11.99.157CPU Optimizations and Packages reliability improvements
2024‑08‑290.11.98.156CPU utilization and console event optimization
2024‑08‑280.11.97.155Reliability to detect unusual updates like redistributables.
2024‑08‑270.11.96.154
2024‑08‑260.11.95.153Faster response for reboot requests
2024‑08‑200.11.92.150Additional package upgrade pre-requisites
2024‑08‑150.11.89.147
2024‑08‑060.11.87.145
2024‑07‑260.11.83.141Add resiliency for MAC duplicates and uptime
2024‑07‑250.11.82.140Changes to facilitate cross-platform use. Bitlocker and Windows key refinements
2024‑07‑150.11.80.138Antivirus and temperature added to configuration checks
2024‑07‑150.11.79.137Add configuration checks for execution policy and secure boot
2024‑07‑110.11.77.135load balancing refinements
2024‑07‑100.11.76.134Add additional load balancing and data residency capabilities, add randomness to recurring task timings to decrease server load
2024‑07‑050.11.74.132changes to graph and residual work on user imporsonation
2024‑07‑040.11.73.131Add configuration checks for execution policy and secure boot.
2024‑07‑030.11.72.130Enhanced event log monitoring
2024‑07‑020.11.71.129Add details to Windows updates, enhanced risk metrics for application patches
2024‑06‑190.11.65.123Update resiliancy and garbage collection
2024‑06‑130.11.60.118Enhanced logging
2024‑06‑120.11.55.113Include the primary drive serial number; MAC addresses for built-in wireless, Bluetooth, and ethernet into the device hash to restore uninstalled and reinstalled devices in cases where the motherboard serial is not unique
2024‑06‑070.11.54.112Patch and package uninstall data addition
2024‑06‑050.11.47.105refine per-user registry application listing
2024‑06‑020.11.45.103uninstall and reinstall refinements, refine local logging, refine self-update and uninstall timing
2024‑05‑300.11.21.79various bug fixes and improvements
2024‑05‑280.11.16.74Error logging, registration, and uninstall improvements.
2024‑05‑240.11.14.72applied changes for devices and login commands, changes for registration as well
2024‑05‑220.11.13.71Add Windows computer model, improve Operating System parsing
2024‑05‑210.11.11.69Added additional states for Windows update, flexibility for non-standard program file configurations, support for network diagrams at the switch level, details for Windows editions
2024‑05‑210.11.10.68Add specific cases for Defender patterns and Composer versions.
2024‑05‑170.11.3.61Change Log storage location to c:\program files\Lavawall
2024‑05‑170.11.1.59self-update improvements.
2024‑05‑160.8.0.55 error log reporting and management.
2024‑05‑150.7.0.54Websocket resiliency improvements
2024‑05‑090.6.0.53 Error log reporting and management.
2024‑05‑010.5.44.52Even more improvements to scheduler
2024‑04‑240.5.41.49Install compatibility with Sandbox
2024‑04‑220.5.21.29Project property changes to enable automated compilation with new features.
2024‑04‑200.5.20.28Add motherboard serial number and company reassignment
2024‑04‑110.5.4.12Automate release notes as part of build process
2024‑04‑030.5.3.11Websocket and service enhancements
2024‑03‑210.5.2.10Enhance zip file validation

Although the Linux agent code base is mature, dating back to 2006, we're still constantly improving it to add value and compatibility for new distributions. Some of our most recent changes include:
2024‑05‑20253Added cleanup of old .json files during a re-install
2024‑05‑13252Added apt-get update to install
2024‑05‑06248Allow restart to use /var/run/reboot-required if needrestart is not installed
2024‑04‑22239Improve internal update and version tracking
2024‑04‑15235Add support for Yum packages
2024‑04‑08233Align patching with Windows patch reporting
2024‑04‑02228Add support for needrestart
2024‑03‑04224Schedule restarts
2024‑03‑25221Add support for apt packages
2024‑03‑18212Implement release management
2024‑03‑11202Add user login monitoring
2024‑03‑04189Enhance installation reliability
2024‑02‑26187Exapand triggers to identify if the instance needs to be restarted
2024‑02‑19146Improve compatibility for non-AWS instances
2024‑02‑14138Add self-uninstall capabilities
2024‑02‑12135Enhance scheduling flexibility
2024‑02‑07132Add kernel version tracking
2024‑02‑05124Add device hash to cryptographic self-update script validation
2024‑01‑29107Enhance encryption of patch data
2024‑01‑2298Improve how available storage is calculated
2024‑01‑1597Move initial tasks from installation file to sub scripts
2024‑05‑2191Improve multi-distribution compatibility
2024‑05‑2179Improve encryption reliability
2023‑12‑1168Enhance cryptographic validation of new scripts before updating
2023‑11‑2062Add inner layer of AES encryption in case TLS inspection doesn't allow for a secure connection
2023‑11‑2756Additional base cases for resiliancy
2023‑11‑2054Additional headers added to authentication process during installation.
2023‑11‑2053Enhanced key management
2023‑11‑1551Add insecure installation parameter to allow installation in environments with TLS inspection or other machine-in-the-middle situations.
2023‑11‑0642Enhance redundant encryption during installation.
2023‑10‑3033Improve install-over compatibility
2023‑10‑2318Add reboot configuration and scheduling
2023‑10‑2317Add self-updating functionality.
2023‑10‑1615Add Linux patching information for apt
2023‑10‑0914Collect system information
2023‑10‑0913Add Linux distribution information
2023‑09‑3012Add memory monitoring
2023‑09‑3010Add hardware information
2023‑09‑239Add AWS information
2023‑09‑238Add customized schedule capability for configuration updates
2023‑09‑237Add support for package monitoring using package and dpkg logs
2023‑09‑166Add storage data configuration gathering
2023‑09‑165Add CPU information

Lavawall®'s data gathering approach started with Government and Fortune 50 information security audits. When our founder transitioned from audit and assurance work to a Managed IT Service Provider (MSP), he was shocked that basics like Multi-Factor Authentication were painful to implement in some RMMs like ConnectWise and it was impossible to turn off remote access services in others like Datto RMM and SuperOps.

Lavawall® was built from the ground up with these concerns and the Minimum Viable Secure Product requirements in mind.

Some of the controls we implemented include:
  • PassKeys as the preferred primary authentication at no additional cost
  • Single Sign-on using modern, maintained, and industry-standard protocols for all customers at no additional cost
  • Multi-Factor Authentication as a non-negotiable default
  • Encrypting communications the same way as TLS again within the TLS tunnel, so we can allow TLS inspection without breaking like Huntress or disclosing security vulnerabilities to eavesdroppers.
  • Encouraging external vulnerability reports and customer testing
  • Passwords checked against popular disclosed passwords, hashed before they leave your computer, and then stored using Argon2id
  • Not requiring the use of passwords at all. We consider them a temporary backup authentication in case you can't use passkeys or SSO.

Lavawall® scanning computers are on dedicated servers in Calgary, Alberta, Canada.
Lavawall® databases and front-end systems are hosted with AWS in Montréal, Québec, Canada.
We send emails through AWS in Ireland and dedicated servers in Calgary, Alberta, Canada.
We send text messages for additional identity verification through Twilio in the United States.
We store executables and pass requests through Cloudflare at your nearest edge location.
We use Cloudflare for risk management, turnstile, and web application firewall services.
We use LeadPages for landing pages.
We use Google and Facebook for analytics on our public-facing pages, but they do not have access to the console.
We integrate with third-party tools, such as Microsoft, Google, Huntress, Screen Connect, Axcient, and Datto in their respective locations. However, you must initiate these integrations through single sign-on or by enabling them in your Lavawall® console.

Active security by design

Lavawall® is under active development with the latest release on

5+

Interfaces

150+

Monitored Applications

7+

System Metrics

Actively manage your IT with Lavawall®

Patching

Updates Beyond Windows

Lavawall® prevents the 80% of breaches and failed audits due to missing patches and updates.
You can reduce application patching delays from 67 days to nearly immediate with the 150+ applications that Lavawall® monitors and patches.

Patch release monitoring
Monitor everything without having to select packages or “managed applications”
Patch impact classification
Standard and optional Windows patches
Lavawall patch grid
Application Patching

Some of the applications that Lavawall® monitors and audits include:

.NET updates
1Password
3CX Desktop App
3CXPhone for Windows
6.0 .NET Desktop Runtime
6.0 .NET Runtime
6.0 .NET SDK
6.0 ASP.NET Core Runtime
7-Zip
7.0 .NET Desktop Runtime
7.0 .NET Runtime
7.0 .NET SDK
7.0 ASP.NET Core Runtime
8.0 .NET Desktop Runtime
8.0 .NET Runtime
8.0 .NET SDK
8.0 ASP.NET Core Runtime
9.0 .NET Desktop Runtime
9.0 .NET Runtime
9.0 .NET SDK
9.0 ASP.NET Core Runtime
Acer Configuration Manager
Acer drivers and firmware
Acronis True Image
ActiveState Komodo Edit
Adblock Plus
Adobe Acrobat (64-bit)
Adobe Acrobat DC (64-bit)
Adobe Acrobat Pro
Adobe Acrobat Reader
Adobe Acrobat Reader DC
Adobe Creative Cloud
Adobe Creative Cloud
Adobe InDesign
Adobe Photoshop
Advanced IP Scanner
AIMP
Alienware Command Center Suite
Amazon Chime
Amazon Corretto 22
Amazon Games
Amazon Kindle
Amazon Music
Amazon Music
Anaconda3
AnyDesk Windows
Apache HTTP Server
Arduino USB Driver
ASUS drivers and firmware
Autodesk Advance Steel
Autodesk AutoCAD Architecture
Autodesk Revit
AutoElevate
Automatically Added Applications
Avaya Workplace
AWS Copilot CLI
AWS VPN Linux
AWS VPN MacOS
AWS VPN Windows
Axcient Backup Agent
Azure drivers and updates
Azure VPN Client
Bitdefender Endpoint
Bitwarden
Bitwarden Browser Extension
Bitwarden CLI
Bitwarden MacOS
Bitwarden Server
Bluebeam Revu
Brady Workstation
Brave Browser
Brother drivers and firmware
Burp Suite Beta
Burp Suite Enterprise Edition
Burp Suite Stable
Canon My Printer
Caseware Working Papers
CCleaner
Chocolatey
Chrome Remote Desktop
ChromeOS Platform
ChromeOS Stable
Citrix Workspace
Clean Your Device
Cloudflare WARP
Code::Blocks
Composer - PHP Dependency Manager
Conexant drivers and firmware
CrowdStrike Falcon
CrowdStrike Windows Sensor
CutePDF Writer
Datto Endpoint Backup
Datto RMM
Dell Command
Dell drivers and firmware
Dell iDRAC Service Module
Dell Optimizer
Dell Support Assist
DisplayLink Graphics Driver
Docker Desktop
docuPrinter Pro
DoxCycle
Dropbox
Dymo Connect
Dymo ID
Dymo Scale
Dynamo Core
Dynamo Revit
Elan drivers and firmware
Evernote
Evoluent drivers and firmware
ExpressConnect Drivers
FARO LS
FileZilla Client
FileZilla Server
Firefox
Foobar2000
Formit
FortiClient VPN
FreeCAD
Garmin drivers and firmware
GIMP
Git
GitHub Desktop
Glance Client
Glance Guest
GN Audio drivers and firmware
Go Language
Go Programming Language
Google Chrome
Google Drive
Google Earth
GoTo 4
GoTo Desktop App
GoTo Meeting Desktop App
GoTo Opener
GoTo Resolve Desktop Console
GoToAssist Expert
Grammarly MacOS
GrampsAIO64
Heidi Eraser
HeidiSQL
HP Click
HP drivers and firmware
HP I.R.I.S. OCR
HP OCR
HP Scan Basic Device Software
Huntress Agent
Huntress Rio
ICS
Inkscape
Intel drivers and firmware
IrfanView
IronPython
ITE Tech drivers and firmware
iTunes
Java 8
KeePass Password Safe 1
KeePass Password Safe 2
Krisp Ai Meeting Manager
LastPass Desktop (Installed)
LastPass Desktop (MS Store)
Lenovo Commercial Vantage
Lenovo drivers and firmware
Lenovo System Update
Lenovo Update Retriever
Lenovo Vantage
Lexmark drivers and firmware
Lexmark International Printer
LibreOffice
libusb-win32 drivers
Local Administrator Password Solution
Logi Bolt
Logitech drivers and firmware
Loom
Magic Control Technology drivers and firmware
ManageEngine ADSelfService
MAXtoA
Microsoft Defender
Microsoft Defender Engine
Microsoft Defender Engine Version
Microsoft Defender Platform
Microsoft Defender Platform Version
Microsoft Defender Version
Microsoft Dynamics Station 1
Microsoft Dynamics Station 2
Microsoft Dynamics Station 3
Microsoft Dynamics Station 4
Microsoft Dynamics Station 5
Microsoft Dynamics Station 6
Microsoft Edge
Microsoft Malicious Software Removal
Microsoft OneDrive
Microsoft PowerBI Desktop (x64)
Microsoft Teams
Microsoft Teams Classic
Microsoft Teams Free
Microsoft Visual C++ 2005 Redistributable (x64)
Microsoft Visual C++ 2013 Redistributable (x64)
Microsoft Visual C++ 2015-2019 Redistributable (x64)
Microsoft Visual C++ 2017 Redistributable (x86)
Microsoft Visual Studio Code
Microsoft.UI.Xaml.2.7
Microsoft.UI.Xaml.2.8
MozBackup
Mozilla Maintenance Service
MySQL Community Server
MySQL Workbench
Nmap
Node.js LTS
NordPass
NordVPN
Norton 360
Norton Secure VPN
Norton Security
Notepad++
Nox APP Player
NV Access
NVIDIA GeForce Experience
NVIDIA Graphics Driver
NVIDIA PhysX System Software
OBS Studio
Obsidian
OpenOffice
OpenShot Video Editor
OpenSSL
OpenVPN Connect v2
OpenVPN Connect v3
Palisade @RISK Platform
Panorama9
PDF Architect
PeaZip
Perimeter 81
Pidgin
Plex Media Server
PostgreSQL 12
PostgreSQL 13
PostgreSQL 14
PostgreSQL 15
PostgreSQL 16
Postman x86_64
PowerBI Desktop
ProFile
Pulse Secure
PuTTY
Python 3.11
Python 3.12
Python Launcher
Pythonnet
qBittorrent
QuickBooks Premier
Raspberry Pi Imager
Reaktek Audio Driver
Realtek drivers and firmware
RealVNC Server
RealVNC Viewer
reMarkable
Remote Access
RICOH drivers and firmware
RingCentral
Room Sketcher
SafeNet Authentication
Safenet drivers and firmware
Sage 50 Accounting
ScanSnap Home
ScanSnap Manager
ScreenConnect
ScreenConnect Client
ShowMyPC
SketchUp
Skype
Skype for Business
Slack
Sonos Controller
Sophos Endpoint Agent
SourceTree
SQL Server 2019
SQL Server 2022
SunplusIT drivers and firmware
superpowered.me
Symantec AgentInstall
Symantec WSS Agent
Synology Acvtive Backup for Business
Synology Assistant
TaxCycle
Teamviewer
Tenable Nessus
Tenorshare
Thunderbird
TightVNC
Titus Classification
TriGrid Windows Connector
Trillian
TrueCrypt
TruGrid Windows Connector
TunnelBear
U.S. Robotics Corporation Model 5637 Voice Driver
Umbrella Roaming Client
UXP WebView
VeraCrypt
Visual Studio 2013
Visual Studio 2015
Visual Studio 2017
Visual Studio 2019
Visual Studio 2022
VLC
VMware Player
VMware Tools
Webex Cisco Windows
Wildix Collaboration
Wildix Integration Service
Windows Defender updates
Windows PC Health Check
WinPcap
WinRAR
WireGuard
Wireshark
X Split Gamecaster
Xerox WorkCentre
XnResize
XnView Classic
XnView MP
Xprotect
Yarn
Yubikey Manager
Zebra Setup Utilities
Zebra Status Monitor
Zed Attack Proxy (ZAP)
Zoom
Zoom Workspace
Zwift
Logos, products, trade names, and company names are all the property of their respective trademark holders.
The above listing includes products that Lavawall® monitors through public information and/or proprietary statistical analysis.
Although we do have a partner relationship with some of the listed products and companies, they do not necessarily endorse Lavawall® or have integrations with our systems.

Learn More
Flexible Term; Flexible Service

Flexibility for your dynamic business

You need to get your arms around compliance and security and don't want to get locked into “high watermark” monthly invoices or multi-year contracts.

Pay-as-you-need monthly pricing

DIY, full management, and coaching options

CMMI, PCI, SOC2, Canadian Cybersecurity, Minimum Viable Secure Product, and other compliance support

Choose the plan that's right for you

Simple pricing. No hidden fees. Advanced features for you business.

Month
Annual

Get 2 months free with Annual!
DIY

Security-focused RMM

C$3.25 /computer/Month

C$32.50 /computer/Year

  • 1 computer
    or 1 of the following cloud integrations:
    AWS, Axcient, Connectwise, Datto, Google, Huntress, M365, Sophos Central integrations
    (each integration counts as 1 computer)
  • 150+ application patches
  • 30-day Logs
  • Security configuration monitoring
  • Anomaly detection
  • CMMI, MVSP, CyberCanda compliance
  • Lavawall® support
  • Sophos MDR: C$13.50/desktop
    Sophos MDR: C$162/desktop
  • Huntress: C$5.40/device
    Huntress: C$64.80/device
  • Available white-label support for end users
  • Level 3+ IT support for IT
  • Weekly IT coaching sessions
Popular
Managed Security & Support

Unlimited end-user support

C$160 /user/Month

C$1,600 /user/Year

  • 1 computer/user
    Additional devices charged at DIY prices
  • AWS, Axcient, Connectwise, Datto, Google, Huntress, M365, Sophos Central integrations
  • 150+ application patches
  • 90-day Logs
  • Security configuration monitoring
  • Anomaly detection
  • CMMI, MVSP, CyberCanda compliance
  • Lavawall® support
  • Sophos MDR Essentials
  • Huntress
  • White-label email and phone support for end users
  • Level 3+ IT support for IT
  • Weekly IT coaching sessions
  • Automatic discount and upgrade to Support & Coaching after 15 users
Support & Coaching

Improve your IT performance

$2,250 /Month

$22,500 /Year

  • 25 computers included
    Additional computers charged at DIY prices
  • AWS, Axcient, Connectwise, Datto, Google, Huntress, M365, Sophos Central integrations
  • 150+ application patches
  • 90-day Logs
  • Security configuration monitoring
  • Anomaly detection
  • CMMI, MVSP, CyberCanda compliance
  • Lavawall®-only support
  • Sophos MDR Essentials
  • Huntress
  • White-label email and phone support for 15 users included Additional: C$150/user Additional: C$1,500/user
  • L3 IT support for IT
  • Weekly IT coaching sessions

Frequently Asked Questions

If you can not find answer to your question in our FAQ, you can always contact us or email us. We will answer you shortly!

General Questions

The three big catalysts for Lavawall® were:
  1. Two years after a missing Plex Media Server led to the LastPass breach, the Remote Monitorign and Management (RMM) tools availabel for Manged IT Service Providers (MSPs) still didn't monitor for it.
    Going through industry-specific applications, we noticed many were missing from the big RMM and patching providers. MSPs, insurance providers, and organizations that put their cleints at risk need to know about these risks, which lead to the largest number of critical audit findings and breaches
  2. After 20 years of writing the same audit findings about system configurations, Payment Card Industry (PCI) compliance, and missing patches, our technical co-founder wanted to make it easier fo avoid these findings
  3. The existing risk visibility tools for insurance underwriters took a shallow look at Internet-facing risks. They -- along with all businesses -- need a deeper view of the threats that could actually lead to breaches.

Lavawall® breaks vulnerabilities into the following groups:
  • Domain risks
  • Operating System (OS) patches
  • Application patches
  • Network vulnerabilities
  • Cloud vulnerabilities
  • OS configurations

We are currently building more third-party interfaces. Current interfaces include:
  • Axcient*
  • Cloudflare
  • Connectwise Screen Connect
  • Datto RMM
  • FreshDesk*
  • Huntress
  • Microsoft 365
  • Panorama9
  • ZenDesk
*In limited release/development

Yes!
You can use your own logo for the console and notifications. You can also use a CNAME to automatically brand your console.
Note: you cannot currently re-proxy the CNAME to Lavawall® through Cloudflare.
Privacy & Security

We encourage primary authentication for Lavawall® through Passkeys or Single Sign On (SSO).
However, we do allow passwords and use passwords as part of the zero-knowledge encryption for your clients' sensitive data, such as Bitlocker keys and Personally-Identifiable Information (PII).
These passwords use Argon2id slow hashes with individual salts and peppers.

Yes! Lavawall communicates with its endpoints through TLS. However, given that many of our clients want to be as secure as possible and have TLS inspection enabled, we allow for "insecure" connections with invalid certificates, which result from such configurations.
We have added an additional secure tunnel that mimics the TLS process within the public TLS tunnel. This extra tunnel provides authentication and privacy for the workstations and the Lavawall® servers to prevent attacks such as the one that took down Solar Winds.

We do not enable remote access tools like ScreenConnect unless you authorize them and are logged in. Lavawall® was not vulnerable to the ScreenConnect vulnerability because we install and uninstall it right before it's used. In addition, we give the option of linking to Access.

Remote access is not enabled for read-only and audit situations.

Lavawall®'s designer holds a CISSP and CISA. In addition, we have external and internal security reviews.

Get In Touch

Have a quick question and don't want to talk? Send us a quick note with the form below and we'll reply within one business day.

NW Calgary:
(By Appointment Only)
ThreeShield Information Security Corporation
600 Crowfoot Crescent N.W., Suite 340
Calgary, Alberta
T3G 0B4
SE Calgary:
(By Appointment Only)
ThreeShield Information Security Corporation
105, 11500 - 29th St. SE
Calgary, Alberta
T2Z 3W9
Canada
Phone
+1-403-538-5053
Sales Hours:
9:00am to 5:00pm Mountain Time
Support Hours:
7:00am to 7:00pm Mountain Time
On-Call Support Hours:
24/7

Monitor the real security risks with Lavawall®